Bakflip MX4 Replacement Cable Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for plastic piece that protects pull cables
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 23
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is a replacement piece for the plastic cover around the cable that you pull to unlatch the next section of the Bakflip MX4 tonneau cover. This particular model is a 2019 version for the RAM 1500 but I imagine it would work for other versions and, potentially, other Bakflip models.
I have put screw holes on both sides, so it can be used on both the passenger and driver sides of the cover. Also, I designed a cable channel so that it can be installed without disassembling the latch on the tonneau cover.
There are two files. The first "Exact Length" is the version that is a 1:1 replacement but, unfortunately, it doesn't fit on the MK3/MK4 print bed (250mm x 210mm). The shorter version works and just fits on the print bed if you turn it diagonally.
Print Settings:
PETG for a little more durability than PLA. Any filament will work.
0.2 mm layer height - this is more important than I realized. I used 0.3 mm and the additional layer height doesn't allow it to fit under the lip of the metal channel. Use 0.2 mm.
I used organic supports but, if your bridging is dialed in, you may not need it.
I used 30% infill and 3 perimeters