Philips One Blade Sword Storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a storage for your philips one blade shaped like a sword for medival KCD2 style.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a holder for the philips one blade designed after the medival style of KCD2. It hold the philips one blade in place laying flat. If you don't want to print the model using multiple filaments you could print in white like I did and paint it using acrylic paint. Keep in mind that if you use acrylic paint you could rub it of with your hand but if you put a clear coat of spray paint on top it should not come of easily.
Print Settings:
Layer height 0.08mm (or as small as possible)
Infill 15% Gyriod pattern
Supports on build plate only (I used grid supports but use what you want)
Wall loops 2
Keep in mind that you might
want to scale the model up or down depending on which oneblade model
you have. But should work right away.
Paint guide
The colors needed are silver, white for mixing and black. I used acrylic paint but if you have another paint you would like to try use that. If your'e using acrylic paint then you might want to have clear spray paint on hand if you don't want the paint to com of when the model is rubbed. When your'e going to paint the rocks mix the black and the white paint to the hue of rock you want. If you want to shade your rocks start with the lightest shade and move from there on.
But now that you have your paints I would recommend starting with the lightest color first and move to the darkest in this case you would start with the silver color. When painting the first color you don't need to be careful to paint in to areas where your'e going to paint other colors. Just make sure the area where the paint is laid smooth on the surface. You may need to do multiple coats in that case wait for the first coat to fully dry before laying the next, the same is said when switching to a new color.
The coloring scheme for the model if you want to copy my painting. Is to fully paint the Sword a silver color, paint the rock a dark grayish color and use a darker color for shade also i painted the bottom circle black but if you have a white top you lay it on you might want to paint it white. After fully painting and drying the result should look something like this:
