1 / 4
IKEA KNÖCKLA (KNOCKLA) 25L waste bin pedal full replacement — image 1
1 / 4

IKEA KNÖCKLA (KNOCKLA) 25L waste bin pedal full replacement

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Full replacement pedal for IKEA KNÖCKLA (KNOCKLA) 25L pedal bin. FreeCAD file included.

Rating
0 / 5
Likes
0
Downloads
20
Makes
0
Views
89
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Edit: 2026-03-11: Added solid model files without the hollow.

Full repacement pedal for IKEA KNÖCKLA (KNOCKLA) 25L pedal bin. I drawn and printed this because the original one broke after about 2 years. I don't know if this model works with the 50L version.

I printed this in Qidi Q2C, eSUN PLA Basic, 0.4 mm nozzle, 0.3 mm layer height, 4 wall loops, 30% gyroid infill, with brim, then I manually added modifiers in OrcaSlicer to set some parts to use 100% infill (see the image below), I don't know if these 100% fill modifiers are really needed, but I was afraid they are going to break when inserting. I believe the middle modifier is not needed because it's relatively easy to insert, but the top cylinders are a bit hard to install, so I chose to print with 100% infill up there instead of wasting material for another big print.

I've been using this for about 2 weeks before sharing the model, so far I think it worked well and probably better than the original one, because this one feels much more bouncy.

This is designed to be printed standing. There are some overhangs/bridges in the connection parts, but shouldn't be too hard to handle.

FreeCAD file included if you want to modify the design, drawn in version 1.2.0 dev.

Tags