IKEA KNÖCKLA (KNOCKLA) 25L waste bin pedal full replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Full replacement pedal for IKEA KNÖCKLA (KNOCKLA) 25L pedal bin. FreeCAD file included.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Edit: 2026-03-11: Added solid model files without the hollow.
Full repacement pedal for IKEA KNÖCKLA (KNOCKLA) 25L pedal bin. I drawn and printed this because the original one broke after about 2 years. I don't know if this model works with the 50L version.
I printed this in Qidi Q2C, eSUN PLA Basic, 0.4 mm nozzle, 0.3 mm layer height, 4 wall loops, 30% gyroid infill, with brim, then I manually added modifiers in OrcaSlicer to set some parts to use 100% infill (see the image below), I don't know if these 100% fill modifiers are really needed, but I was afraid they are going to break when inserting. I believe the middle modifier is not needed because it's relatively easy to insert, but the top cylinders are a bit hard to install, so I chose to print with 100% infill up there instead of wasting material for another big print.
I've been using this for about 2 weeks before sharing the model, so far I think it worked well and probably better than the original one, because this one feels much more bouncy.
This is designed to be printed standing. There are some overhangs/bridges in the connection parts, but shouldn't be too hard to handle.
FreeCAD file included if you want to modify the design, drawn in version 1.2.0 dev.
