1 / 4
Aquaristic stand for 60mm Sodastream CO2 bottle — image 1
1 / 4

Aquaristic stand for 60mm Sodastream CO2 bottle

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Stand for aquaristic CO2 bottle

Rating
0 / 5
Likes
0
Downloads
14
Makes
0
Views
89
Reviews
0

Updated at source:

Model information

Category
Pets
License
Creative Commons — Attribution — Noncommercial — Share Alike

I designed this holder for my aquarium.

It is intended for sodastream bottles with a diameter of 60mm.

The bottle is not in the middle of the holter !!!

I deliberately designed it so that the bottle is a little further back to balance the protruding fitting.

The holder can be attached to the surface with 2 screws. Basically, it is surprisingly stable for me even without screws. 

The stability can vary depending on the CO2 fitting used.

For safety reasons, it should be screwed down so that the bottle cannot accidentally fall over.

I printed it with a 0,4mm nozzle with ABS.

But other plastics are of course just as suitable for this.

I used the following settings:

-3 external wall lines

-Layer thickness 0,2mm

-7 bottom an 7 top layers

-15% infill

Have fun with the model :-)

Tags