Speaker Adapter for Hyundai IONIQ 5 SE 2024 – Rear Door
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drop-in adapter to fit Kenwood KFC-1698RS speakers into the rear doors of a 2024 Hyundai IONIQ 5 SE, with correct positi
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 37
- Makes
- 0
- Views
- 286
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Drop-in adapter to fit Kenwood KFC-1698RS speakers into the rear doors of a 2024 Hyundai IONIQ 5 SE, with correct positioning against the door duct and weatherstripping seals on both faces.
This adapter replaces the factory rear door speakers with the Kenwood KFC-1698RS (Crutchfield link).
Crutchfield includes generic adapters, but they don't fit well in this rear location. This adapter does two things: matches the diameter and bolt pattern between the door frame and speaker, and positions the speaker correctly to seal against the duct in the door trim panel.
I added self-adhesive weatherstripping to seal both the door frame side and the trim panel side.
The adapter prints in two pieces that are glued together. I maximized the gluing surface area for a strong bond. I printed in ABS and used acetone-dissolved ABS as solvent weld — this thickens the acetone, improves gap filling, and slows evaporation slightly. MEK is a good alternative with a longer working time. CA glue or epoxy will also work if you're not using ABS.
Three M2×5mm screw holes are provided to hold the pieces in alignment while the glue sets, but they are not structural — the glue joint carries the load.