Prusa i3 MK2(.x) low profile ajustable spool holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is another Prusa i3 MK2 low profile spool holder with manual spool width adjustment using a knob
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Main parts are printed in PETG/PLA, the rolls in flexible filament, the cogwheel and the rack in Taulman Bridge (nylon).
You need more:
2 pieces of 8mm aluminium pipes (or rods), 160mm long each from your local hardware store or from here:
https://www.amazon.de/-/en/Aluminium-Round-Tube-Length-500/dp/B0FSS4GW7Y?th=14 bearings like this:
https://www.amazon.de/-/en/bearings-shielded-miniature-skateboard-accessories/dp/B0BJZXYMCH
Infill 10-20% for all the PETG/PLA pieces except nuts and bolts, 80% for the nylon cogwheel, the rack and for the nuts and bolts.
Print 4 rolls and 4 end-stops.
A 20min. descriptive video is available here:
https://www.youtube.com/watch?v=5ZAf8En3Qx0