CATV 2.0Ghz Seizureless Probe Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
replaces the stock screw on cone cap for the probe that fits newer 2.0Ghz seizure-less taps
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
replaces the stock screw on cone cap for the probe that fits newer 2.0Ghz seizure-less taps. prevents damage to the pin, reduces contact with water and dirt, and provides easier storage of, and access to, the probe.
mount to meter bag or other surfaces with a zip tie through the foot vertically or horizontally. I use another zip tie above the DC blocker to keep it tight to the case. IYKYK
print with a few extra walls (3-4) and increase your infill to at least 20-25%. I used PETG for added strength.
3mf file includes a block on supports for the zip tie holes. super annoying if not.