Kame's Fluval FX Intake Strainer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement intake strainer for Fluval FX Series canister filters.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 136
- Makes
- 1
- Views
- 414
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Share Alike
Replacement intake strainer for Fluval FX Series canister filters. Hole for mounting is 24.9 mm in diameter. Strainer holes are small at about 1.6 mm squares. No obvious reduction in flow with the Fluval FX4 over the stock intake strainer but I have not tested with a flow meter.
PETG is recommended. 3 Walls. No supports.
On the back side there will be a small strand of filament to cut or break off at the bottom of the mount for a suction cup. This was added to allow printing without additional supports. Suction cup mount was designed to accept the same suction cups (Fluval A15041) included with the stock intake strainer.
CAD Project here: https://cad.onshape.com/documents/23345c615df190f733cd3515/w/6c0408c4379f3aa8b8bbc7d0/e/7a5a9bbfc61a90e377f009c0