CR-10 V2/V3 Hemera (REVO) upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount and upgrades for a CR-10 V2/V3 to E3D Hemera/Hemera REVO extruder.
- Rating
- 5 / 5
- Likes
- 38
- Downloads
- 307
- Makes
- 2
- Views
- 3,077
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Combined and designed this setup from the best ideas and designs I could find (in my humble opinion of course)
Features:
- Single piece backplate.
- No loss in build volume.
- Nozzle in original position.
- Cable routing thru backplate for nice cable management.
- BLtouch as close as possible to the nozzle and in the same line (offset: X:-36 Y:0).
- Good part cooling with plenty of room for (REVO)nozzle changing.
- Filament runout and runout sensor integrated
Used hardware:
- 9x M3x8 hex bolt (backplate)
- 2x M3x10 hex bolt (fan mount)
- 2x M4x25 hex bolt (fan duct*)
- 5x M3 nut
- 2x M4 nut
*The lower M4 fan bolt needs to be trimmed to ±23mm
Printed all parts in PLA, this seems to hold up fine so far.
Lever and fan duct are printed with 0,10mm layer hight to get a smoother surface.
fan mount and backplate at 0,20mm
no supports required for any parts.
For the firmware I love Nic Wilson work on Nic's Creality 3D Printer Firmware & 3D Printing Support.
This firmware worked well for me with stock V3, V3 with BLTouch and V3 REVO Hemera.
Firmware:
https://www.facebook.com/groups/485185272196044/
Attribution:
Inspiration:
https://www.thingiverse.com/thing:4745635
Fan duct and mount (unchanged):
https://www.thingiverse.com/thing:4042492
Mockup parts:
X-axes carrage:
https://www.thingiverse.com/thing:4610356
BLTouch:
https://www.thingiverse.com/thing:1229934
Hemera REVO:
https://e3d-online.zendesk.com/hc/en-us/articles/4413023524497-Revo-Reference-Hemera-CAD
5015 blower fan:
https://www.thingiverse.com/thing:1576438