35mm large diameter lock-on grips
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
35 mm grip diameter, 155 mm length (including lockrings). Designed for the lockrings from Reverse Components grips.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 13
- Makes
- 0
- Views
- 128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing material: TPU/TPE. Tested with both 95A and 83A.
Number of perimeters: 2 for soft grips, 4-5 for hard grips.
Layer thickness: 0.1 - 0.2 mm
Infill: gyroid, 8-30% depending on the desired hardness.
Supports: Snug, from the printbed only. Check that the "membrane" closing the inner hole is on the end facing the table. Remove the membrane from the inner hole together with the supports.
Designed for use with the following lockrings: https://reverse-components.com/en/products/classic-%C3%B829mm
The original grips wore down quite quickly and I decided to create a printed model that will fit my big hands.
The photo features the previous iteration of the grips design. The only change is the optimized pattern that is more grippy in rotational axis and contains no overhangs over 40 degrees.
Cut the model at 7 mm and 148 mm to use without lockrings (glue or hairspray might be required to securely fix the grips on the handlebar).