Sir Radzig's Sword Embeddedin Stone
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sir Radzig's sword embedded in stone as stand for philips oneblade
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 34
- Makes
- 0
- Views
- 397
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Printing instructions
First plate ( Black filament ) | Wall loops | Layer height |
|---|---|---|
Grip 1.STL Grip 2.STL Washer 0.4mm.STL x2 Washer 0.2mm.STL x2 | 3 3 2 2 | 0.2 mm 0.2 mm 0.2 mm 0.2 mm |
Second plate ( Silk silver filament ) | Wall loops | Layer height |
|---|---|---|
Blade.STL Guard.STL x2 Ring 1.STL Ring 2.STL Pommel.STL | 3 2 2 2 2 | 0.2 mm 0.12 mm 0.12 mm 0.12 mm 0.12 mm |
Third plate ( Grey filament ) | Wall loops | Layer height |
|---|---|---|
Base.STL | 2 | 0.2 mm |
Higher wall loops to reinforce the screw part on grip STLs
Smaller layer height to help with the fine details but 0.2 mm will be good as well if you want
Use washers to adjust pommel rotation, do not over tighten.
Assembly instruction:
Enhancing the details for the sword using old dry mascara (melted with hot water)
Render picture with OneBlade from here: