948 models
This is a Squintsworth Glasses Holder. It works well with any glasses or sunglasses. Looks great on a desk or night stand. Recommended print settings layer height: 0.2 mm infill: 10% gyroid perimeters: 3 supports: no Prepared files…
This is a digital 3D printable model of Sir Radzig Kobyla's sword carried by Henry in Kingdom Come. (Fan-made, unofficial, non-commercial artwork.) The download contains pieces of the model ready to be 3D printed on a 200 mm print bed…
(Description in german below // Deutschsprachige Beschreibung folgt unten) Inspired by the design "Funnel and bottle base for Elegoo resin by antcam" (on Thingiverse) I designed a new, slightly modified version. Main difference is the…
NOTE 2025: This design is OLD! I made this back in 2016 for my Makerbot Replicator 2. So the design might not fit on your print area. And you have to print it at the original size to use the metal bearings. Also the printers back then had…
Extender v8.0 for GameSir G8+ optimized for versatility and ease-of-use. Version 8.0 has been streamlined to just two components , ensuring a faster print and easier setup. It’s engineered to fit tablets up to 11″ , including popular…
Prints well at 0.1-0.2mm, no supports required. Make sure the rotor is free from elephant-footing and can spin freely. A small dot of oil on the center shaft will help it run smoothly. Quite loud and responsive, actually.
I've seen other Minecraft diamond ore lamps in various places by they all seem to lack the definitive pixelation that Minecraft embraces. By leveraging techniques used from 3D printed lithographs and some of the features of the latest…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Clodsire, Tabletop DnD miniature 50 mm Large base which can be used for DnD and other Tabletops.
A Siren Head. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
If you have any needs, please contact us - [email protected] Get PS-2 : https://quadmula.com/products/ps-2-profile-spacer Get PS-3 : https://quadmula.com/products/quadmula-ps-3-profile-spacer
His identity is as mysterious as his powers. He had the very first attraction at Starr Park, but rumor has it he was kicked out unfairly, and banned from ever returning. Now... he's back for REVENGE.
Etafri ÆSIR II - An Open-Source, Endurance Quadcopter: 2S-8S Power ÆSIR II is an open-source design concept, allowing users to fully 3D print a high performance, lightweight quad-copter to almost limitless specifications of their…
Fast and easy print! Printed with nozzle 0.4 / layer 0.2 - no supports Absolutely minimal construction to turn the large horn available with the Portable Air Horn into a very loud siren whistle. Simple assembly and disassembly. See video…
Created this cover to create a nice visual appearance on the back of the GameSir G8 Controller. Especially helpful if you cut the tabs to hyperextend the controller to fit a tablet (such as the Legion Y700 pictured). Recommend printing…
This is a remix of the Siren by MlePh. https://www.thingiverse.com/thing:1568198 It is scaled down by 80% to fit easily in a 200x250 bed. But once adjusted, it is VERY loud! (completely saturated a phone mic at 2 meters for example).…
Get PS-3 profiled spacer - https://quadmula.com/products/quadmula-ps-3-profile-spacer Capacitor use Rubycon ZLH series
We've designed this camera mount for our DJI Osmo Action 4 to fit the Quadmula Siren F5 Mini Split. This mount comes in two types, with just the record button hole or with a big hole for easier removal of the camera. RECCOMENDATIONS:…
This is a tribute to the great Python, Terry Jones, who passed away a few days ago. Sir Bedevere in Monty Python and the Holy Grail was one of many characters he portrayed. He will be missed. Suitable for 28mm tabletop games. Created so…
Want a larger piggy bank version of this model. I have them here: https://www.myminifactory.com/object/3d-print-96875 https://cults3d.com/en/3d-model/art/piggy-sitting-piggy-bank-version "He seems to be a generic kind of piggy. Perhaps…
Print turbine upside down to avoid sagging Before assembling, remove excess material and surface irregularities Use silicone oil (but not silicone grease) to lubricate axis. Requires running-in(like new engine). For the micro chain check…
Modified parts for https://www.thingiverse.com/thing:1568198: SirHa_Kurbel2.stl -> PNU_handle_grip.stl. Cut an edge to the top and bottom plate as at least my printer can't print circles in air Gehäuse_2_a1.stl ->…
I'm a big fan of Dummy 13 by Soozafone and I wanted to add a bizarre twist to it. So say hello to the Siren head mutation from hell. Schlossbauer did a really good job making a model of Siren head. I wanted to explore if it was possible…
Added a bottom plate to the original file from thingiverse Original: https://www.thingiverse.com/thing:4729670
It is a siren head model that I added feet and joints so it can move
My primary printer is a Prusa i3, and the bed size was just not enough to handle the original design. I had pretty good success with the 80% build by MlePh ( https://www.thingiverse.com/thing:3410556 ), but I wanted to scale up in size.…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
This STL is a combination of the top and bottom halves of the original model. I found it difficult to get the top and bottom perfectly aligned when printed in four parts. This is simply printed in two parts (print same part twice) and…
A simple antenna mount for the T-mount stock IMRC Ghost receivers antennas. For QUADMULA SF3 To install the T-style antenna into the Mount, slide one side of the white part of the receiver into the mount, then flex the mount to about 90°…
This is an air raid siren built to go inside a Stuka dive bomber model. The Stuka was a German terror weapon used in WWII. As it dived to drop a bomb, a siren would sound out from the plane to terrify the people they were bombing. This…
He's soooooooo cute, look at him flop around. (Hat not included)
Layer height form 0.1-0.2mm work fine. Do not add support. There are two small supports already there under the double-conical rotor for support as it's printing, just remove those after. After printing gently-ish work the rotor around,…
No tools to assemble and remove The spring tension and clips hold the extender in place. Easy to install and remove. This mod requires that the end stops be clipped on the controller. (which can be done without any disassembly) Print both…
Made for a friend who has this as a tattoo. I added the cads too if you need to modify it any.
Statue of Osiris With added Uv Displacement to Mesh.
Update 7 and 8: 11/16/2021 and 11/17/2021 These are still my recommendations: Siren_Whistle_Mouthpiece v50.stl Siren_Whistle_Horn_Alternate_shallower_indented_cone.stl Rotor_Modification_4p6.stl For some additional experimenting fun with…
Das ist ein Halter für die More Zerup Sirup Flaschen. So kann ich ungenutzte Flächen im Schrank nutzen, und die Flaschen sind aufgeräumt. Es passen 8 Flaschen in den Halter. Einer Version der Halter habe ich noch mit Stützen versehen,…
EDIT 2: v5 - further ergonomic improvements, enlarged cutout for proper USB charging. Final version for now. There may be a sharp little nub you need to trim/sand where two angles meet near your palm, I am too lazy to fix the model at…
OVERVIEW + IMPORTANT INFO!! My original model 2 was one of my more popular models among people creating my sirens due to the lack of complexity and affordable design. However there was one glaring problem with it… It SUCKED SO BAD!!!!…
3D print file for QUADMULA Siren F5 S2 The TPU used officially has a hardness of 95A *except for the camera side plates(cam shell) and the action camera base, all other TPU parts of Siren F5 S2 and Siren F5/Siren F5 Split are…
Dies sind Halter für die More Zerup Sirup Flaschen. Für 2, 3, 4 oder 5 Flaschen. So kann ich ungenutzte Flächen im Schrank nutzen, und die Flaschen sind Aufgeräumt. Diese können ohne zu Schrauben in die innen Seite einer Schranktür, oder…
Simply chuck the controller on this stand and it should align itself for charging 99% of the time. A minimalistic controller stand for the GameSir Cyclone 2. The geometry of the stand should make it easier to align the controller with the…
This is the original Siraya Tech Test 2021 V5. I just used Orca Slicer to arrange in the position for the multi exposure test on my Elegoo Saturn 4 Ultra. And cut the numbers on each test so they match the numbers on the screen of the…
Back bracket to allow an over-extended GameSir G8 Plus to fit on an Apple M4 iPad Pro comfortably. You do have to really pull the springs apart to get this on but I'm quite happy with the results! Printed upright (lip facing up) in PLA…
This modification allows you to use the Gamesir G8 with a Lenovo Y700 tablet. If you are confident in your first layer adhesion and ability to print 45° overhangs, print with smallest section facting the bed as seen in the image. A brim…
Elegant 3D printable statue of a seductive goddess. Flowing silk-like robe, long hair, rose crown, jewelry details, sensual pose with chalice. Marble pedestal base with vines. Modular STL + OBJ for easy resin printing. A luxury display…
Ever wanted to annoy your neighbors? How about your whole neighborhood? Well this is it! This little siren is dumb loud. Its a nice little 8 port siren that screams loud enough to make you question your life choices and wonder if its even…
I used a 80cm M8 screw and glue for assembling it. Also added a wall support that uses thumbtacks for hanging it in the wall. The assembly order is simple 1-2-3-4-5-6 and 7. The full model is also included
This is the ultimate tracking case for your new-look Apple TV Siri Remote. If you already have a Siri Remote, this case is perfect for protecting it and keeping it organized. The bottom of the case features a slot for your AirTag, with a…
The design features deep-relief runes and the central Vegvisir symbol. the symbol is intended to help the bearer find their way through rough weather. Because of the uneven surface on these coasters, sweaty glasses will not stick to them…
how to build All sensors are from Sensirion. They all use I²C bus. The two little ones can withstand 3.3V and 5V, the PM sensor needs 5V. I choose to operate the little ones at 3.3V to minimize their heating. The SCL and SDA wires can be…
I really liked the spout and breather on the Phrozen bottle by akwerdesigns. I took the threads created by tslater2006 and merged the two features together. - Printed with funnel oriented down - Brim needed only if bed adhesion is an…
This is a project I put together as a gift for my niece. I've only made the one and I was super pleased at how well it came out! I used the existing (Totoro)[ https://www.thingiverse.com/thing:12146 ] model by (Joo)[…
you just glue the stator to a motor or fan and apply rotor in the motor axle. Then you glue the horn, and thats it. video without horn: https://www.tiktok.com/@robankowy_33/video/7532181389832211734 video with horn:…
The new smallest siren on my Printables!! I made this Q2B because I've been getting back into biking recently and since my previous bike bell broke when I crashed a while back, I had the idea of making a bike-sized Q siren that could…
Relive the classic sound of World War II air raid sirens with this exclusive 3D print model. Designed to actually work, the siren uses 2212 brushless motors with ESCs, controlled by Arduino, allowing speed adjustments, sound effects, and…
This is a digital 3D printable model of the Sword of Sir Valentine inspired by Kingdom Come. (Fan-made, unofficial, non-commercial artwork.) The download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and…
A simple holder for the Siri Remote of the Apple TV 4K. It has a small recess on the back for a strip of double-sided adhesive tape. On the bottom, there is a cutout to charge the remote. Works with Siri Remote 2nd Gen. (A2540, Lightning)…
(One of MossyMav8802's sirens is at the beginning of this video but the P-50 comes after) This is by far the biggest and most detailed project I have EVER made. It's taken around a year to complete and I hope you all will love it as much…
Remix of https://www.printables.com/model/1182209-gamesir-g8-plus-extension-for-samsung-tab-s9 and fits my m4 13" iPad perfectly and is super stable. Please see the video on the original model for assembly instructions.
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
I really liked this print, but I couldn't find one that fit my remote. This is for the 2021 2nd Generation Apple TV 4K, 2021 Apple TV HD, and 2nd Generation Siri Remote. I opted for a smidge of slack so picking up the remote didn't lift…
Clay tablet; letter from Nanni to Ea-nasir complaining that the wrong grade of copper ore has been delivered after a gulf voyage and about misdirection and delay of a further delivery Production date: 1750BC Museum number: 131236…
This is created with Fusion 360, to edit this model, you will need a 3D modelling software that supports .f3d files. Everything is fully customizable using variables. NOTE: THIS IS ONLY CAPABLE OF CREATING SINGLE-TONE SIRENS
🐧 The Honest Shelf Vol. 44 // Sir Waddleton 🐧 Meet Sir Waddleton – the most sophisticated penguin to ever grace your desk! ✨ PRO TIP: To give Sir Waddleton that premium, "arctic-stone" look, I highly recommend enabling "Fuzzy Skin" in…
a revised version from the first i made. small improvements and in easier files to print. used with M3 screw inserts. Fits ipad pro 11". but u can cut it down to fit smaller screens.
3D print files for the QUADMULA SirenA F35. The TPU used in our official parts has a hardness of 95A. *Please note that some Exclusive TPU Parts are offered exclusively as finished products, so their STL files are not publicly released.…
Side cover compatible with Gamesir G8 plus controller
I made a cut waste collection container for my wives BabyLock Desire3 Overlock Coverlock machine. The waste bin fits perfect between the edges of the machine and hold it wile sewing.
Get PS-3 profiled spacer - https://quadmula.com/products/quadmula-ps-3-profile-spacer Capacitor use Rubycon ZLH series
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Quagsire, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
I love the Radzig's/Henry's sword model by 3Demon (although it is a little too small in the original scale), but I missed a way to protect the delicately sanded and painted blade when taking the print out to show to friends. Hence, a…
you will need a hobby motor and one rotor and stator of matching port # (the thunderbolt stator is universal and can be used with any rotor) you attach the motor body to the siren stator and the motor shaft to the siren rotor there is an…
Straight out of the jar and ready for battle — Pickle Warfare is an original 3D printable statue design by SirPrintzALOT . This fearless pickle stands tall with dual .50 caliber machine guns, one in each hand, proudly standing over a…
This complete redesign from "Back Cover for GameSir G8 (universal and Y700)" was created by bassderek. This two-part design allows you to extend the GameSir G8 out to fit an iPad Mini 6. The case covers both the back and front and is…
mini aca cyclone for use with the Samsung microwave blower motors all parts require supports but the supports on the rotor are optional all hardware for mounting the stator to the motor is included on the motor the rotor is intended to…
This is a simple phone holder for the gamesir cyclone 2. I sized it to my pixel 9 pro xl with chunky case. It fits snugly. You can adapt the model as you like. It seems like the mounting mechanism is fairly universal to the cyclone range…
We have had this lamp proudly displayed in our home in our foyer for nearly a year now and we get lots of compliments on it! It is super easy to print. This lamp assembles from 12 sides all printed flat on the printer's bed, which then…
DISCLAIMER: I don't personally own a printer and can't print this out to test so it might jam up bc of the insane overdrive ratio and lack of actual bearings So its basically just an air raid siren powered by a hand crank. It uses a…
A sturdy and simple stand for eight of your More Zerup Sirups, or other brands with similar bottle sizes like DM, Ahead etc.
Made this so that the iPad mini 6's volume buttons aren't engaged by the sides of the gamepad. Printed mine in TPU at 0.16mm, let me know if PLA works! Also pictured: this back plane extension
I did this as a 2 piece print to have a TPU liner inside to avoid scratching the controller and make for a nice fit. The outside I just printed in PLA with no supports, although I would add supports for the very top piece if I were to…
Can be printed with any material. Print uses Screws. This siren should be compatible with the rotator box for my Tbolt model, but I plan to make it's own rotator box in the future. This siren should be held on the rotator box by friction.
A case to connect a Sensirion SEN5x series air quality sensor to a D1 mini for wireless reporting. Based on the mechanical design-in example for SEN5x & SPS50 .
I made a simple axe without the hammer. Will LOVE to see you makes!
Peter Sirpol’s RC Utility Ship is a 3D-printed, mid‑ to large‑sized RC boat designed for practical, work‑oriented use . It’s aimed at hobbyists who want a durable, functional boat capable of handling rough water and carrying loads.
After a year and a half of small iterations I finally have made a grip for the GameSir X2 that's actually comfortable to use. It features: a slide on/off mechanism for easy attachment and detachment. A hole to charge the GameSir X2. A…
Design in process… I tried to print the Air Raid Siren - hand crank version on my printer, but my printer is small. After printing version 3.0/3.1, which are scaled for small printers, and noticing with disappointment that the Air Raid…
Apple TV Siri Remote Stand Print instructions Print with at least 20% infill to help the top layers. Also looks better if you print it with the top face on the bed.
After a few years of usage, I observed that the power button of my Apple TV Siri Remote was wobbling, threatening to pop out of the casing. And then, one day, it was gone. Missing, leaving a hole with an unreachable switch at the bottom.…
Can be printed with any material. The V2 has larger ports wich should make the siren louder and a larger motor hole 5mm Designed for the 1000 dual tone and 1003 models of thunderbolt.
If you are going to use this model for your own model, make sure the license matches and that you give me credit. After not compiling all of the separate files for some reason, I put them all into one to save people some time Uses a 280…
Featured in PC Gamer. Link here . I had some spare RC parts and a new 3D printer and needed to make something. I saw a pic of this great air raid siren, and thought I can do that… It is designed to fit a 2830 BLDC out-runner motor, mine…
Update Notes 29 August 2025 : Added new version of the Guard ring (v4). a little bit hollow, with added wings inside to add more resistance to the left and right direction button Added new version of the Dpad insert (v4). Longer part for…
Leaving this up only for archive purposes. If you're looking to print a mini model 2, print my new one!! https://www.printables.com/model/1411904-new-mini-model-22t-siren-completely-revamped
This is a remix of a couple files I found on Thingiverse: https://www.thingiverse.com/thing:3715845/files I took the funnel model and the threaded model (used for transfering from one bottle to another) and merged them together for a…
The Mourning Siren The significance of the mourning siren in classical art, particularly in ancient Greek art, is deeply rooted in funerary practices and beliefs about the afterlife. Here's a breakdown of their key roles: Association with…
(Adding this as of right now. Ruthex (the brand that makes the threaded inserts apparently decided to either like discontinue a bunch of their sizes or they're literally just out of stock on EVERYTHING. Amazon will re-direct the link to…
All Sentry 3V8 siren parts here If you are going to use this model for your own model, make sure the license matches and that you give me credit. HOW TO BUILD: 1: Measure your motor's dimensions and modify the stator and rotor if needed.…
![1/4 Scale Federal Q2B Siren [BIKE BATTERY PACK!!!]](https://media.printables.com/media/prints/801fc401-0fd4-48b9-bf5f-726646484fca/images/13537966_0645e60b-61a8-420a-8f86-f0c0fb60ffb6_ee68b4ac-86d7-4417-8d1c-36218ee026cb/screenshot-2026-08-09-191803.png)
