1 / 7
Back Cover for GameSir G8 (universal and Y700) — image 1
1 / 7

Back Cover for GameSir G8 (universal and Y700)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Back cover for the new G8 controller to hide the slider mechanism/springs.

Rating
5 / 5
Likes
68
Downloads
1,543
Makes
2
Views
13,954
Reviews
1

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Attribution — Noncommercial — Share Alike

Created this cover to create a nice visual appearance on the back of the GameSir G8 Controller. Especially helpful if you cut the tabs to hyperextend the controller to fit a tablet (such as the Legion Y700 pictured). Recommend printing upright on end with a brim, no supports needed. You can go without brim if you are printing a shorter spacer/back cover.

3 Files included:

  • 200mm universal - put your phone or tablet in your G8 and measure the gap at the back - then trim the file in your slicer to be about 1mm shorter than the gap (it needs to be slightly shorter so the springs can still clamp your device).
  • 99mm Y700 - pre-sized to fit Y700.
  • Y700 shim - due to the slimness of the tablet there is still a gap between the controller and tablet. Slide this in between so the controller feels more solid. I printed this with no top and bottom layers and honeycomb infill to keep it lighter.

Depending on how thick your phone/tablet is you may still want some sort of shim behind it.

Tags