Counting matching models…
Extender v8.0 for GameSir G8+ optimized for versatility and ease-of-use. Version 8.0 has been streamlined to just two components , ensuring a faster print and easier setup. It’s engineered to fit tablets up to 11″ , including popular…
Created this cover to create a nice visual appearance on the back of the GameSir G8 Controller. Especially helpful if you cut the tabs to hyperextend the controller to fit a tablet (such as the Legion Y700 pictured). Recommend printing…
No tools to assemble and remove The spring tension and clips hold the extender in place. Easy to install and remove. This mod requires that the end stops be clipped on the controller. (which can be done without any disassembly) Print both…
EDIT 2: v5 - further ergonomic improvements, enlarged cutout for proper USB charging. Final version for now. There may be a sharp little nub you need to trim/sand where two angles meet near your palm, I am too lazy to fix the model at…
Simply chuck the controller on this stand and it should align itself for charging 99% of the time. A minimalistic controller stand for the GameSir Cyclone 2. The geometry of the stand should make it easier to align the controller with the…
Back bracket to allow an over-extended GameSir G8 Plus to fit on an Apple M4 iPad Pro comfortably. You do have to really pull the springs apart to get this on but I'm quite happy with the results! Printed upright (lip facing up) in PLA…
This modification allows you to use the Gamesir G8 with a Lenovo Y700 tablet. If you are confident in your first layer adhesion and ability to print 45° overhangs, print with smallest section facting the bed as seen in the image. A brim…
Remix of https://www.printables.com/model/1182209-gamesir-g8-plus-extension-for-samsung-tab-s9 and fits my m4 13" iPad perfectly and is super stable. Please see the video on the original model for assembly instructions.
a revised version from the first i made. small improvements and in easier files to print. used with M3 screw inserts. Fits ipad pro 11". but u can cut it down to fit smaller screens.
Side cover compatible with Gamesir G8 plus controller
This complete redesign from "Back Cover for GameSir G8 (universal and Y700)" was created by bassderek. This two-part design allows you to extend the GameSir G8 out to fit an iPad Mini 6. The case covers both the back and front and is…
This is a simple phone holder for the gamesir cyclone 2. I sized it to my pixel 9 pro xl with chunky case. It fits snugly. You can adapt the model as you like. It seems like the mounting mechanism is fairly universal to the cyclone range…
Made this so that the iPad mini 6's volume buttons aren't engaged by the sides of the gamepad. Printed mine in TPU at 0.16mm, let me know if PLA works! Also pictured: this back plane extension
I did this as a 2 piece print to have a TPU liner inside to avoid scratching the controller and make for a nice fit. The outside I just printed in PLA with no supports, although I would add supports for the very top piece if I were to…
After a year and a half of small iterations I finally have made a grip for the GameSir X2 that's actually comfortable to use. It features: a slide on/off mechanism for easy attachment and detachment. A hole to charge the GameSir X2. A…
Update Notes 29 August 2025 : Added new version of the Guard ring (v4). a little bit hollow, with added wings inside to add more resistance to the left and right direction button Added new version of the Dpad insert (v4). Longer part for…
Empuñadura mejorada/remixeada de joystick Gamesir X5 Lite modelo base de : Empuñadura para mando inalámbrico X5 de Gamesir por sunny号的宝藏 MakerWorld: Descarga Modelos 3D Gratuitos fue modificado debido a que seguía pareciendo corto el…
My gamesir T4 thumbstick broke ,couldn't find replacement ,so I made one. print with paint on support without applying the support to the fitting hole. print with 0.2 layer height or lower for smoother print. Edit: updated 14/3/2024
A replacement for the GameSir T4 pro phone mount. view the original for the remaining parts and the hardware you will need. Category: Mobile Phone
Made in 2 styles, one with sliding rails to make it more compact for a carry case (My personal fav) or a one print piece that dose NOT have the sliding rail function, In my instance you will need to add supports where the bottom hooks to…
This is a 4 piece model that enhances a Y700 tablet and gamesir x2 pro controller to be more ergonomic. Parts of the design are inspired by https://www.thingiverse.com/thing:5907243 . Optionally, you may want to print the “Gamesir Spacer”…
This is my Xbox style d-pad for the gamesir g7 pro. Supports are needed and care when removing them afterwards. The pins on the back are made to be a snug friction fit so some sanding may be needed. The taller part viewed from the side is…
Legion go side rail cover extended under angle for Gamesir G8 plus controller for more comfortable viewing angle
In my opinion the GameSir Galileo G8 Plus is currently the best way to play Nintendo Switch 2 in handheld mode. The grip is great but I did not like how the controller put pressure on the consoles joy con pins. This spacer keeps pressure…
I needed a way to hold my controllers at the wall and I have found one good mount with another purpose for the Dualsense, so I remixed. But still needed one for the Gamesir G7 SE, so I designed one from scratch and there is the result.…
In the quest to make the Gamesir X2 (pro) more ergonomic, this is my (probably) final release, now with a mechanism to clip the controller on to the device, no adhesive needed (this does require a pretty well tuned printer). This grip…
The Gamesir G8 Plus bluetooth controller is just a little too wide to hold the Nintendo Switch in portrait mode so I designed this sleeve to fill in the gap. I started with the holder from…
The GameSir Cyclone 2 has two slots on the top for attaching a phone holder, this model repurposes them to hold the included USB dongle for travel. Might work on other GameSir products if they use the same attachment slots. Tolerances…
Shorter Gamesir G8+ holder for RRTronics extender. settings: .2mm nozzle
This two-piece magnetic adapter lets you comfortably use a Samsung Galaxy Z Fold 8 with a case inside the GameSir G8+ controller. The open center provides clearance for many cases with hinge protection, while the separate left and right…
This makes using the OnePlus Open with the G8+ more comfortable by keeping it centered and leveled as the phone has an absurdly large camera bump making it lopsided, giving it a chance to pop out of the controller.
A simple clip-on mount designed for GameSir Nova Lite controller , featuring a MagSafe attachment to securely hold your phone. Easy to print and easy to use, it’s made for quick setups while gaming or testing. This mount was designed…
I designed inserts for various Gamesir controllers which hold phones in portrait orientation (vertical) for emulating games that are better suited in this orientation such as Gameboy and Nintendo DS. I typically print with 3 perimeters. I…
IKEA Skadis holder for gamepad Gamesir Nova Lite with tray for usb reciever.
The GameSir G8 Plus doesn’t come with a built-in charging option for your phone, so I designed this tool to fix that. It securely holds a right-angle charger in place, letting you charge while you play without stressing the cable or…
just a scan of controller for your needs, feel free to use
Adapted as per the instructions in the original model to fit a Samsung Galaxy Tab S10 Plus. This has been printed and tested, but does come up a little large for a Samsung Galaxy Tab S10 Plus without a case, testing with some cases to see…
I just wanted a way to get low-latency audio on my GameSir G8+ and couldn’t find anything online, so I created this myself. It holds my Galaxy Tab S9 without any issues, and I designed it so it should work with different tablets and…
As the name suggests, a mod to make the ABXY button on the Cyclone 2 shorter to press. I made some from 0.2-0.4mm thickness, try what best for you. I use 0.2mm on mine. Modeled as accurate according to my caliper measurements. The printed…
I wanted to create a simple adapter/sled that fit around the Galaxy S21 FE phone inside the Gamesir X2 Pro Controller so that it looked nice and clean. I printed the adapter vertically on it's side with a brim and organic supports. For…
Simple gamesir controller stand/support modified to be screwed into the desk's side. Plasterboard screws can be used. I printed it on an ender 3 v3 with 0.20mm layer height and the other default settings. Note that this is a remixed…
This is an attachment for mounting a smartphone vertically on the GameSir G8 Galileo Controller. By using a mapping app such as Mantis Gamepad, you can control smartphone games that do not support controllers. (Can't the GameSir app map…
Quick cover for a controller I own to protect it during travels. Intended to be secured in place with Velcro straps or elastic paracord, but rubber bands or other means will work too. Printed in Atomic RepRap Green PLA on a Voron 2.4…
I love gaming on my zFold 8 with my Gamesir G8+ controller, except for one small flaw. When using cases with hinge protection and the device in landscape mode, the device is elevated above the flat part of the controller that it's meant…
Adapter for better fit and look of TYPE-C version of GameSir X2 gamepad with access to lock/volume buttons. Gave second life to the unused device with broken outer screen. Much better experience while used with "Console Launcher" app.…
Support to for phone on T3s Gamesir for Tello or other use 2 versions: 1/4 inch photo screw hole Flash support type Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: Yes Resolution: .2 Filament: PRUSA PETG…
Introduce the capability to shorten the trigger distance for the Gamesir T4 Kaleid. This serves as a drop-in replacement for the current trigger stop. All components fit into place. Utilize the existing magnet and screws.
I whipped this together as a proof of concept, I don't own the phone myself - will need feedback from S24 Ultra owners on what doesn't work/fit/etc. I'm hoping the phone can mostly slide in from the top and sit in firmly place thanks to…
Problem: When putting GameSir G8+ gamepad into bag thumb stick always gets caught up in the pockets and items. That's why i design this ultra low profile thumb stick to allow this gamebad to be kept easily into your bags. Model gives you…
Spacer that prevents the USB-C from entering too deep into the phone, thus preventing connection between devices.
For the Gamesir Cyclone 2 controller. This thumbstick is taller than the original. Designed to be printable without supports. Suggest using PETG
3 pieces that are easy to print with the flat side down. The thin one is rather optional and only fills a small gap. It can be easily glued to the front frame. The back piece can be clipped on and serves two purposes. It closes the rather…
The GameSir X5 Stand is a purpose-built 3D printable stand designed to give your controller a proper home when it’s not in your hands. Instead of leaving the X5 face-down on a desk, tangled in cables, or slowly migrating toward the edge…
A wall mount for a gamesir t4 cyclone pro. I couldn't find one so I designed one and it could possibly work with other controllers but I haven't tried any. I made a standard one, a shorty if you like it tighter to the wall, and one with…
I’m using a Gamesir G8+ Bluetooth gaming controller paired with a Samsung Galaxy Z Fold7. The problem? The phone doesn’t sit firmly, especially when it’s in its case. It works, but not in a way that inspires confidence. So I designed a…
After designing the frame for the Galaxy S9 I also acquired an S9+ and made this one. The S9+ has an even better fit for the GameSir X2, since its size is more maxed out. (See the design for the S9:…
Descripción General Este mod es la solución que ayuda con el estrangulamiento térmico ( thermal throttling ) cuando juegas títulos pesados o usas emuladores con el GameSir G8 Galileo. El diseño original del control bloquea la parte…
I wanted to design something for this charging dock and to make my life a bit easier I send it to a friend of mine for a quick 3D scan. Here is the model for anyone who would like to use it.
Samsung Galaxy Fold 8-Gamesir G8+ adapter with magnet for those who are worried the hinge is under stress. Just install the adapter and put your Fold 8 with a Magsafe back protection on the adapter magnet. Magnet:…
The stand consists of two holders and a connector. Using the connector is optional, it only keeps the two holders in position. If you use it, make sure to tilt it slightly so you don't see it through the hexagonal hole of the holder, then…
I lost the original mount that came with the controller so I designed my own. Clips into the controller the same way as the original mount. Sized to fit a Pixel 7.
I was toying with the idea of making the controller more like a drone controller with longer sticks. I figured it might be good for both drone sims and racing games. For sim racing games it's definitely better in terms of precision but I…
Extends the handles of the Gamesir X5 Line, should fit X5 Lite and other X5 but only tested on X5s.
Replacement for broken off mount that holds gamepad and phone holder together, use superglue to attach parts to gamepad/phone holder. Print models in orientation as imported with supports. You can still charge your gamepad normally but…
A spacer for the Gamesir G8+ which allows you to passthrough a USB cable to your phones charging port to charge while playing.
Remix of https://www.printables.com/model/510666-joystick-savers-v2 combined with oval "Wings" from https://www.thingiverse.com/thing:5349829 for GameSir G8/G8 Plus. Print Settings Printer Brand: Monoprice Printer: Select Mini V2 (E3D)…
Problem: When putting GameSir G8+ gamepad into bag thumb stick always gets caught up in the pockets and items. That's why i design this ultra low profile thumb stick to allow this gamebad to be kept easily into your bags. Model gives you…
Ever so slightly shortened the model and removed some material one spot to accommodate the Lenovo Legion Tab. Before, the Legion Tab would be just barely too loose to comfortably use with the controller; now it's a snug fit. With this,…
Makes it so you can use regular thumb stick caps on the sticks. I can now use my PS4 Kontrol Freaks or my skull & co stick caps. Feel free to remix and make it better, I am just sharing what's currently working on mine.
******* E N G L I S H ******* Docking station for up to four GameSir Nova Lite or Nova Lite 2 controllers. You’ll also need one of these 540-degree Chinese USB-C magnetic cables. A 540° cable has a swivel joint (180°) and a rotating head…
Just a stand to prop up your controller.
GameSir G7 Pro accessory box. Box is a remix of 'Rugged Box' by @Whity. The insert part has cutouts for spare d-pads and joystic insert caps. Requires 6 M3 20mm screws.
Das Model dient als Ersatzteil. Mein Controller fiel mir runter und der Hebel brach ab. Er lässt sich am besten mit dem Teil das später den Finger berührt auf dem Bett drucken. Wer mehrfarbig oder Multi Material drucken kann, kann den…
Basic model made in OrcaSlicer for hanging Gamesir Tegenaria T3 Light (wired) gamepad. There are 2 models, with and without hook to hang/screw/glue/tape it to side of a furniture/wall. Without the hook look a lot ticker (a lot of plastic…
This part press-fits on to the sliding rail behind the controller grip and can hold a small power bank in place for extra long gaming sessions. The model was specifically designed to be used with a OnePlus 13 phone w/Magnetic Sandstone…
Story I wanted find a hard case for my GameSir X2s and after searching for a while I literally found only 2 designs which were either too big and bulky, or too revealing for me. So, I decided to make my own. Print Recommendations The test…
Gamesir Cyclone 2 thumbstick replacement.
a cassette for a gamesir g8 that holds a female to female adapter. this allows you to use it as a controller for your pc I used this one
Just a quick model cut from the linked grip to allow you to put the Thor, with the clear TPU shell, into a Gamesir G8 plus, maybe works for other controllers of the same type. Cut out the vent hole so air could go upward when I realized…
Story I really wanted to try out making accessories for my phone so I decided to make a vertical adapter for my phone controller, So I could play vertical games like for DS, 3DS, and other mobile titles. Print Recommendations No specific…
GameSir T4n Lite controller holder for the Fractal North PC case Supports required for hooks
MultiBuild Gamesir Super Nova Mount MultiBoard, MultiGrid compatible Designed for GameSir Super Nova but could fit other controllers No supports needed
A caddy for the UUSB dongle that plugs in to the USB C receptacle
GameSir X5S Extender – Up to 260mm This is a modified version of the original GameSir X5 Lite Extender , redesigned to fit the GameSir X5S telescopic controller. The GameSir X5S normally supports devices up to approximately 213mm in…
Inspired by the tutorial that u/-Pompon made on Reddit ( https://www.reddit.com/r/Controller/comments/1tnobu5/gamesir_tegenaria_removable_cable_mod_guide/ ), I decided to design a 3D-printed part to fit a USB-C connector more firmly and,…
This is an attachment for mounting a smartphone vertically on the GameSir G8 Galileo Controller. By using a mapping app such as Mantis Gamepad, you can control smartphone games that do not support controllers. (Can't the GameSir app map…
The GameSir G8 Plus doesn’t come with a built-in charging option for your phone, so I designed this tool to fix that. It securely holds a right-angle charger in place, letting you charge while you play without stressing the cable or…
A simple clip-on mount designed for GameSir Nova Lite controller , featuring a MagSafe attachment to securely hold your phone. Easy to print and easy to use, it’s made for quick setups while gaming or testing. This mount was designed…
For the Gamesir Cyclone 2 controller. This thumbstick is taller than the original. Designed to be printable without supports. Suggest using PETG
I designed inserts for various Gamesir controllers which hold phones in portrait orientation (vertical) for emulating games that are better suited in this orientation such as Gameboy and Nintendo DS. I typically print with 3 perimeters. I…
just a scan of controller for your needs, feel free to use
3 pieces that are easy to print with the flat side down. The thin one is rather optional and only fills a small gap. It can be easily glued to the front frame. The back piece can be clipped on and serves two purposes. It closes the rather…
A wall mount for a gamesir t4 cyclone pro. I couldn't find one so I designed one and it could possibly work with other controllers but I haven't tried any. I made a standard one, a shorty if you like it tighter to the wall, and one with…
