Larger baseplate for makita router
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wide baseplate for Makita palm router using the standard handle from the router set
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 115
- Makes
- 1
- Views
- 864
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wide base plate for the Makita Router to help with stabilizing the router when trimming edges, to avoid tilting it in both left/right and front/back.
This base, as compared to others, uses the standard handle part that comes in some kit combinations of the Makita DRT50 or RT0700, part no. 153489-2. This handle uses a M8 nut, and is the same as angle grinders side handle.
Having the second hand in this vertical position also helps with (avoiding) rotation of the router when reaching the end or at the start of a trim.
This handle is intended to be used in this position by Makita, but you need the eccentric base for this and a special fitting, which do come in some sets, but not in mine. I've attached a picture form the Makita manual about this. Manual link here: https://www.manualslib.com/manual/1320219/Makita-Drt50.html?page=18#manual
Print settings
I printed this Using PLA with 40% gyroid infill. It's 2 colors because I started with leftover filament.