1 / 4
PTFE Quad Block Connector
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quad PTFE block connector for inside mount within the Prusa Enclosure.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Block for connecting four PTFE tubes routed around the inside of the Original Prusa Enclosure e.g. for feeding MMU/RMU.
Printed with 0.2mm_PETG 15% infill.
Mount to enclosure using M3x18 screw and M3 nut.
Made for 4off M10 (1.0 mm pitch) pass-through couplings.
Print with the base side down. The 45dg overhangs should print nicely without any supports.