Fystec ERCF Apron LEDs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of the FYSETC Apron LED plates rotated 180 degrees
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I built my FYSETC ERCFv2 kit and used their print files, but when checking the coupler blocks for the ERCT was marked as opaque [o], so following the Voron naming I printed them in black. But then I found out that the coupler blocks are actually clear, I decided to make the coupler blocks work like the LED Apron that is used in the front and with the use of this adapter is working.
I added both STL and STEP files but I recommend using the STL files or to be careful if you're using the STEP files because the plates have a .05mm gap between the elements of the each plate, and when inserting the step files make sure that the checkbox that says "Split compound and compsolid into multiple objects" is unchecked.