1 / 3
VENTILATED THERMOSTAT HOUSING
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A ventilated thermostat housing to suit the Ikea Lack enclosure or any other horizontal mount.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 79
- Makes
- 0
- Views
- 615
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The exhaust fan in my printer enclosure is thermostatically controlled, with all the electronics concealed in the hollow of the Lack table top.
This housing encloses the instrument and the addition of a small vent should prevent heat build-up in the cavity below, where the voltage converter for the fan and lighting system is located.
Print face-down, with supports in the instrument recess only.
This example is in PLA 0.2mm QUALITY mode with a 0.4mm nozzle.