1 / 3
iFootage Quick Release Grip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The stock quick release sleeve is too difficult to grip. Improve it!
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing instructions:
There are two print orientations:
Print on its side
This puts the layers in the best orientation for part strength
A brim is highly recommended
OR, print the part on the two flat surfaces such that the part makes an arch.
The layers are in the weakest orientation. The parts still seem to function just fine.
Supports are required for this orientation
0.1 mm layer height
whatever material you want
Join the parts by using two M3 screws. M3 screw length is flexible. Anything between 12 and 18 mm will suffice.