1 / 7
Domino DF500 dock station
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dock station for Domino DF500
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 31
- Makes
- 0
- Views
- 227
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Attach the base to a piece of plywood or any flat board and clamp vertically or horizontally.
If you print with the plastic that shrinks (ABS/ASA), you want to scale the model 1-2% up ( the model printed as-is in ABS is a very tight fit ). I would also recommend adding the "ears" to the corners of the print - those corners tend to lift (see the photos).
Orient the model with the slanted side facing down.
Print parameters: .4 nozzle, .3 layer height, walls - 5, top/bottom 5, infill 20%.
Print Settings
Supports:
No
Infill:
20% min