Ultra-Thin AMD BC-250 Custom Case

🚀 Ultra-Thin AMD BC-250 Custom Case

Upgrade your AMD BC-250 setup with this sleek, high-performance enclosure. Designed with a focus on minimalism and thermal efficiency, this case is the perfect solution for compact builds.

🎨 The Vibe: This entire case was designed around the RTX A2000 fans—I love their aesthetic and wanted to offer a sleek, thin alternative for this board.

⚠ Disclaimer: Beta Version

Note: This model is currently untested. Due to a faulty AMD BC-250 unit, I have not been able to perform a final fit-test or thermal verification.

Some minor modifications or "fiddling" might be required during assembly. If you decide to print this, I would greatly appreciate your feedback or a remix to help perfect the design!

📏 Dimensions

• Height: 193.30 mm

• Length: 354.40 mm

• Thickness: 48.00 mm

🛠 Technical Specifications

• Heat 3D Inserts: M3 x 5mm x 4mm (x13 required).

• Recommended Material: ASA or ABS (High thermal resistance is mandatory due to the heat output of the BC-250). PLA ONLY FOR PROTOTYPING

• Hardware: 13x M3 screws and matching heat-set inserts.

📦 Bill of Materials (BOM)

To complete this build, you will need the following components:

🖨 Print Settings (can be printed in 225x225 printers)

• Filament: ASA (Highly recommended for temperature stability).

• Walls/Perimeters: 3 to 4 walls for better thread engagement with the heat-set inserts.

• Infill: 25% - 40% (Grid or Gyroid for structural rigidity).

• Supports: Some of them might required supports.