Corner Reinforcement Bracket 65x65mm - Furniture Angle Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Corner Reinforcement Bracket 65x65mm - Furniture Angle Bracket
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 35
- Makes
- 1
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Description
This corner reinforcement bracket is designed to strengthen furniture, shelves, cabinets or wooden structures.
The holes are designed for 4mm countersunk screws but you can easily scale the model in your slicer if needed.
The design is simple and optimized for easy 3D printing without supports.
Dimensions
Size: 65 x 65mm
Hole diameter: 5mm
Designed for 4mm countersunk screws
Recomended Print Settings
Material: PLA or PETG
Infill: 20% or higher
Supports: Not required
Print orientation: Flat on the bed
Typical Uses
Reinforcing shelves
Strengthening furniture corners
DIY furniture repair
Cabinet reinforcement
If you print it
Feel free to post your make and share photos. It helps other makers and improves the project!
