1 / 4
Corner Reinforcement Bracket 65x65mm - Furniture Angle Bracket — zdjęcie 1
1 / 4

Corner Reinforcement Bracket 65x65mm - Furniture Angle Bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Corner Reinforcement Bracket 65x65mm - Furniture Angle Bracket

Ocena
0 / 5
Polubienia
6
Pobrania
35
Wydruki
1
Wyświetlenia
106
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Description

This corner reinforcement bracket is designed to strengthen furniture, shelves, cabinets or wooden structures.
The holes are designed for 4mm countersunk screws but you can easily scale the model in your slicer if needed.
The design is simple and optimized for easy 3D printing without supports.

Dimensions

  • Size: 65 x 65mm

  • Hole diameter: 5mm

  • Designed for 4mm countersunk screws

Recomended Print Settings

  • Material: PLA or PETG

  • Infill: 20% or higher

  • Supports: Not required

  • Print orientation: Flat on the bed

Typical Uses

  • Reinforcing shelves

  • Strengthening furniture corners

  • DIY furniture repair

  • Cabinet reinforcement

If you print it

Feel free to post your make and share photos. It helps other makers and improves the project!

Tagi