1 / 3
CORE One Electreeks Raspberry Pi Camera Mount Modul Bottom
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of the bottom part of Electreeks Raspberry Pi Camera Modul Holder by KPfeiffer for the CORE One chamber
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
A remix of the bottom part of
Electreeks Raspberry Pi Camera Modul Holder by KPfeiffer
for the CORE One Chamber. It should be fastend with a M3-Screw in the screw hole above the chamber fans. The base has a fixed angle which gives you a camera view like in the pictures. (camera view angle is 70 °.)
You still need the other STLs from the thingyverse project.
Use coreone_cameramount_electreeks_bottom_v2 if you assemble the case before fastening it to the printer The screw hole is tighter.