1 / 8
Fishing Line Drill Winder / Fishing Line Spooler | Odvíječ vlasce do vrtačky / Navíječ vlasce — image 1
1 / 8

Fishing Line Drill Winder / Fishing Line Spooler | Odvíječ vlasce do vrtačky / Navíječ vlasce

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Drill fishing line winder for reel maintenance. / Odvíječ vlasce do vrtačky pro údržbu rybářských navijáků.

Rating
0 / 5
Likes
5
Downloads
59
Makes
0
Views
250
Reviews
0

Updated at source:

Model information

Category
Other Sports
License
Creative Commons — Attribution — Noncommercial — Share Alike

Poznámka: Český popis naleznete níže.

Description

A simple fishing line winder for a drill, designed to make handling fishing line easier when maintaining fishing reels.

The model consists of two printed parts and a bolt that allows it to be mounted in a standard drill.

The winder can be used for example for: 
  • quickly unwinding old fishing line from a reel

  • rewinding line or braid back onto the reel (for example when using braid with backing line)

At the top there is a small hook that helps with the initial capture of the line when starting to unwind.

If the old line is meant to be discarded, the spool can be easily disassembled, and thanks to the conical shape of the spool, the line can be pulled off easily.


Assembly

In addition to the printed parts, the following hardware is required:

  • M5 × 50 mm hex head bolt (± a few millimeters is not critical)

  • M5 nut

  • washer

The bolt head fits tightly into the model.
During the first assembly, use the nut to pull the bolt head fully into the hole. After that it will stay firmly in place.

The bolt can then be clamped into the drill chuck.


Print settings

Recommended settings:

  • nozzle: 0.4 mm

  • perimeters: 4

  • infill: 30%

Material

The model was printed from PETG, which provides good toughness and durability.


Popis

Jednoduchý odvíječ vlasce do vrtačky, který usnadňuje manipulaci s vlascem při údržbě rybářských navijáků.

Model se skládá ze dvou tištěných dílů a jednoho šroubu, který umožňuje upnutí do běžné vrtačky.

Odvíječ lze využít například pro:
  • rychlé odvinutí starého vlasce z navijáku

  • převíjení vlasce nebo šňůry zpět na naviják (např. při kombinaci šňůra + podkladový vlasec)

Na horní části je malý háček, který usnadňuje počáteční zachycení vlasce při odvíjení.

Pokud chceme starý vlasec vyhodit, lze cívku snadno rozebrat a vlasec díky kónickému tvaru cívky jednoduše stáhnout.


Sestavení

Kromě tištěných dílů je potřeba:

  • šroub M5 × 50 mm se šestihrannou hlavou (± několik mm není kritické)

  • matice M5

  • podložka

Hlava šroubu je v modelu uložena natěsno.
Při prvním sestavení je potřeba pomocí matice vtáhnout hlavu šroubu do otvoru, poté už drží pevně na místě.

Šroub se následně upne do sklíčidla vrtačky.


Nastavení tisku

Doporučené nastavení:

  • tryska: 0,4 mm

  • perimetry: 4

  • výplň: 30 %

Materiál

Model byl tištěn z PETG, které poskytuje dobrou houževnatost a odolnost.

Tags