Aggressive Eyes for Vorpal Hexapod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Give your Vorpal Hexapod an aggressive look.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 38
- Makes
- 1
- Views
- 435
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Flat portion of the aggressive eyes is one millimeter thick, so I recommend changing filament colors at 1.05 mm or 1.1 mm height.
Eyes are designed to use standard Vorpal Hexapod magnet. There is also a tiny cutout in the top of the nose to allow for the tab just above the magnet slot on the hexapod cap.
No supports or rafts are required for printing.
If you're looking for the tall or short mohawks that the hexapod in the pictures has they can be found here.
*Enjoy and if you print one please post a make/picture!*
This is a remix of “Vorpal The Hexapod Walking Robot” by vorpal on Thingiverse.