Rat Rig Vcore 4.1 Steel tube fitting parts (Funssor CNC Joiners)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parts to help fit the 4.1 steel gantry to Funssor CNC joiners
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 139
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Parts to help fit a 4.1 steel gantry to funssor joiners on a ratrig vcore 4.1
End plug is designed to fit a m5 flanged locking nut, to allow for movement and adjustment you will need to drill a slightly oversized hole (6mm+) in the right location for the top bolt or make a slot (watch out for swarf on the underside and make sure it's removed).
When the back of the plug is flush with the joiner the hole will be aligned - there is enough play in the plug bottom to allow for adjustment to tune rail distance.
Side shims are optional
Due to tube size (18.3mm) I also had to just remove a small amount of material off the top of the stock aluminium spacers ratrig supplies. You could do this carefully with sandpaper or a stone, I used a lathe.