1 / 3
Rat Rig Vcore 4.1 Steel tube fitting parts (Funssor CNC Joiners) — zdjęcie 1
1 / 3

Rat Rig Vcore 4.1 Steel tube fitting parts (Funssor CNC Joiners)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Parts to help fit the 4.1 steel gantry to Funssor CNC joiners

Ocena
0 / 5
Polubienia
4
Pobrania
16
Wydruki
0
Wyświetlenia
142
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Parts to help fit a 4.1 steel gantry to funssor joiners on a ratrig vcore 4.1

End plug is designed to fit a m5 flanged locking nut, to allow for movement and adjustment you will need to drill a slightly oversized hole (6mm+) in the right location for the top bolt or make a slot (watch out for swarf on the underside and make sure it's removed).

When the back of the plug is flush with the joiner the hole will be aligned - there is enough play in the plug bottom to allow for adjustment to tune rail distance.

Side shims are optional

Due to tube size (18.3mm) I also had to just remove a small amount of material off the top of the stock aluminium spacers ratrig supplies. You could do this carefully with sandpaper or a stone, I used a lathe.

Tagi