1 / 1
Prusa CORE One - Modified Vent For PTFE Passthrough For MMU3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified vent for CORE One to allow PTFE tube to pass through from MMU.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 132
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I modified the vent to allow for PTFE from MMU to Extruder to pass through top panel, so it would not require cutting the top panel. Top panel needs to be rotated 90 degrees counterclockwise and short side with cut outs facing the back of the printer. Since it will be in the chamber of the CORE One, print in high temp material, so no PLA.