Dishwasher Tub Nut
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement dishwasher tub nut typically used by Whirlpool, Amana, Maytag, KitchenAid and many more.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a replacement for part number #W11545286 which is used by many dishwasher brands. It's very easy to accidentally break or lose these during installation which will cause water to exit your dishwasher from the 3rd dishwasher rack. Simply print this replacement and included washer for each peg you need, put them onto your 3rd rack pegs and turn 90 degrees.
This part is designed to print needing minimal supports inside of the lock slot. There are external holes on the part which helps with removing this remaining support material. The washer is required to tighten the seal between the inner gasket and lock nut, if you need more or less tightness for your dishwasher you can omit or double it as needed.
I highly recommend printing this in high temperature resistance material. Go look at Prusa's material guide and chose appropriate materials with at least a 4 or 5 in heat deflection. I printed mine in Prusament PC and it holds up well, but depending on how hot your dishwasher gets HT PTEG or or others with a rating of 4 or higher should be fine as well. DO NOT USE PLA, IT WILL DEFINITELY MELT.