1 / 6
Bosch 24V Makita CXT Battery Adapter — image 1
1 / 6

Bosch 24V Makita CXT Battery Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement for Bosch 24V battery using adapter for 2 x Makita CXT batteries

Rating
0 / 5
Likes
9
Downloads
88
Makes
0
Views
1,410
Reviews
0

Updated at source:

Model information

Category
Tools
License
GNU General Public License v3.0

I have an old 24V Bosch SDS Drill with a failed NiCad battery.  Rather than rebuilt the existing battery I designed an adapter to hold two 12V Makita CXT batteries.

The pictures show an earlier design, this design brings out all the connections from the battery to allow a 3S BMS to be fitted for each battery.

WARNING:  The Makita CXT batteries do not appear to have built in battery protection, hence you will destroy them if you over discharge them.  It is recommended that you fit 2 BMS as part of the build, one for each battery.

1pcs 3S 20A Li ion Lithium Battery 18650 Charger PCB BMS Protection Board 12.6V Cell 59x20x3.4mm Module|Integrated Circuits| - AliExpress

The terminals are designed to take standard 6.25mm blade crimps, although these are an interference fit they should be glued in place with either a hot glue gun or epoxy.

Wire the connections to the BMS and then wire the BMS outputs in series to give 24V.  I wired this in 1.0mm^2 wire.  The drill will draw 15-20A so make sure your wiring is suitably rated.

WARNING:  The Makita batteries can output a significant amount of power, check your wiring carefully before connecting the batteries.

The connection labelled T appears to be a thermistor for the battery, however this has not been tested and there is little information available on the build of these batteries.

The battery holders are mounted using heat-set inserts.

Brass Hot Melt Inset Nuts Heating Molding Copper Thread Inserts Nut SL type Double Twill Knurled Injection Brass Nut M2M3 100Pcs|Nuts| - AliExpress

Other Hardware:

  • 4 x M3 x 8mm
  • 6 x M3 x 16mm
  • 6x M3 Hex nuts

Tags