Anchors for hanging Ikea SMUSSLA cabinet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These anchors replace the decorative plugs in the cabinet allowing the use of a 4mm screw and 5mm wall plugs.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 29
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There are two versions, back and side. The back version is 4mm longer because the back panel is slightly inset compared to the side panels. Choose the one you need based on what side you will have facing the wall.
These plastic pieces both pad the gap between the screw diameter and the diameter of the cabinet hole, and distribute the load to a wider area trough the collar, meaning that you can pull the screws abit more (within reason).
Printing in PETG is recommended because of layer adhesion and the capacity to deform a little rather than snapping.
I mounted mine with all four points. Two may actually be enough, but better safe than sorry.