Solució a la impressió de TPU del secador Creality Space Pi
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fixes Creality Space Pi spool slipping on the metal shaft, which can cause feeding issues, especially with TPU.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 28
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
Els secadors de filament Creality Space Pi poden provocar problemes d’alimentació del filament, especialment amb TPU. En alguns casos la bobina llisca sobre la barra metàl·lica interior en lloc de fer girar els rodets. Quan això passa, el filament troba resistència en el camí cap a l’extrusor i poden aparèixer problemes d’extrusió irregular o impressions a l’aire.
Aquesta peça és una funda de TPU 95A que augmenta el diàmetre de la barra i la fricció. D’aquesta manera la bobina agafa millor el corró i el fa girar correctament, fent que els rodaments treballin com haurien de fer-ho.
Dimensions de la peça
Diàmetre exterior: 10 mm
Diàmetre interior: 4 mm
Longitud: 76 mm
La barra d’acer del Space Pi fa aproximadament 3,9 mm, però la precisió de cada impressora pot variar. Pot ser necessari ajustar lleugerament el diàmetre interior perquè la peça entri amb la pressió adequada.
Material recomanat
TPU 95A
També he fet un petit vídeo mostrant el problema i la solució:
Some users of the Creality Space Pi filament dryer experience filament feeding issues, especially with TPU. In certain situations the spool slides on the internal metal rod instead of rotating the rollers. When this happens the filament path gains extra resistance and can lead to inconsistent extrusion or even printing in the air.
This part is a TPU 95A sleeve designed to increase the diameter of the rod and improve friction. This allows the spool to properly grip the roller and rotate it, so the bearings can work as intended.
Part dimensions
Outer diameter: 10 mm
Inner diameter: 4 mm
Length: 76 mm
The steel rod inside the Space Pi measures approximately 3.9 mm, but printer tolerances may vary. You may need to slightly adjust the inner diameter so the part fits with the correct pressure.
Recommended material
TPU 95A