WisBlock Pi Zero portable mqtt bridge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Squeeze a Pi Zero 2W into the center of a WisMesh Pocket v2 all-in-one Meshtastic handheld!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 7
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
Squeeze a Pi Zero 2W into the center of a WisMesh Pocket v2 all-in-one Meshtastic handheld!
For power, I tapped the third leg of the power switch and a GND pin on the radio to connect the Battery IN pins on a MH-CD42. This will step up the battery voltage for the Pi Zero and shut it off when the voltage drops. I shorted the KEY tab to GND so it turns on when the radio is switched on.
Software-wise, you can install whatever you want. I am using Meshtastic bridge with a BLE connection to the radio, then tailscale connects to my mqtt relay.
Printed in Elegoo Rapid PETG+, 0.15mm layer height, no supports.