1 / 12
Charging state for the Bosch refurbished 14.4 V battery — image 1
1 / 12

Charging state for the Bosch refurbished 14.4 V battery

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The item shows the charging state for the Bosch 14.4V battery, which was refurbished from a Ni-Cd to a Li-Ion battery.

Rating
0 / 5
Likes
0
Downloads
7
Makes
0
Views
47
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

Battery charging state unit checks the charging state of the Bosch Battery case used for a Ni-Cd battery pack, now refurbished with a 4 Li-Ion battery pack.

What do we need for assembly?  

  • 3D printed part led-cover

  • 3D printed part led-battery-socket

  • some nickel welding strip 6mm x 0.1-0.2 mm

  • electronic LED charging indicator XW228DKFR4

  • black and red wire for connecting the LED charging indicator to the nickel welding strip

How to assemble? 

  • 3D print both parts (suggested material PETG 0.4 nozzle, 0.2 layer, standard number of vertical, horizontal layers)

  • 2 strips of 50 mm long and 6 mm wide nickel welding strip, implemented in the battery holder 3D printed parts, and formed as shown in the picture 

  • After forming, you may weld ends with solder or with current, then add some solder on top inside the area  to prepare wire joints

  • Solder plus and minus wire to LED charging indicator XW228DKFR4 (additionaly if you don't have a proper 4S-rated display, you may make changes to it follow next URL-s :
    https://ca.rstenpresser.de/blag/2025/07/changing-the-threshold-of-a-led-battery-indicator/

    https://digitalchip.ru/modul-indikacii-zarjada-batarei/ )

  • Press LED charging indicator XW228DKFR4 in to LED cover 3D part; it is a very tight fit 

  • Solder plus and minus wires to the proper contacts on  led-battery-socket parts (prepared nickel contacts, check picture for polarity, or use a battery like reference)

  • Test connection

  • Use Super Glue, or some other glue you prefer, and glue both parts together

Modification 

You may modify parts using FreeCAD. Files are provided for both parts.

Tags