1 / 2
Stepper motor Jog Wheel 1/4 inch Drill adapter (20 mm diameter) — image 1
1 / 2

Stepper motor Jog Wheel 1/4 inch Drill adapter (20 mm diameter)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Stepper motor Jog Wheel 1/4 inch Drill adapter (20 mm diameter)

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
43
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

I created a stepper motor 1/4 inch Drill adapter for a 20 mm diameter jog wheel to aid in adjusting removing Y-Axis block for my Genmitsu 4040 Max CNC. Please use at your own risk.

It's a pretty simple design where the top opening is 21 mm diameter and tapers 7 degrees over 10 mm.  I also added a 1/4 cutout to accept a 1/4 socket drill adapter.  It is not perfect, but does the job.  Note, I ran the drill very slowly and this is much easier than manually rotating the servo motor's Jog Wheel.

I uploaded the FreeCAD model (based on FreeCAD 1.1rc3) that is parameterized with a VarSet.

Tags