Stepper motor Jog Wheel 1/4 inch Drill adapter (20 mm diameter)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stepper motor Jog Wheel 1/4 inch Drill adapter (20 mm diameter)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created a stepper motor 1/4 inch Drill adapter for a 20 mm diameter jog wheel to aid in adjusting removing Y-Axis block for my Genmitsu 4040 Max CNC. Please use at your own risk.
It's a pretty simple design where the top opening is 21 mm diameter and tapers 7 degrees over 10 mm. I also added a 1/4 cutout to accept a 1/4 socket drill adapter. It is not perfect, but does the job. Note, I ran the drill very slowly and this is much easier than manually rotating the servo motor's Jog Wheel.
I uploaded the FreeCAD model (based on FreeCAD 1.1rc3) that is parameterized with a VarSet.