1 / 5
Desiccant canister with hygrometer for filament spools — image 1
1 / 5

Desiccant canister with hygrometer for filament spools

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Desiccant canister with optional hygrometer cap for filament spools, compatible with 1 kg spools from most brands.

Rating
5 / 5
Likes
37
Downloads
112
Makes
1
Views
470
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is inspired by the excellent design by kennyd1gital.

This is a bridging torture test desiccant canister that fits inside the center of most 1 kg filament spools, with an optional hygrometer. The canister is designed with maximum "air holes" for better air flow, and stays attached to the spool while printing and stored. If you print it with temperature-resistant material such as PETG, ASA, PC, etc. the canister can also go into active dry boxes to help with drying the filament.

Design details and variants:

  • The canister is 50 mm in diameter, and 68 mm tall between the two end caps. The end caps have a maximum diameter of 65 mm. So if your filament spool is no more than 68 mm wide, and the diameter of the center slot is between 50 and 65 mm, it will fit! I have tested with Prusament, Sunlu, Polymaker, and Creality spools (see image).

  • 2 options for the main canister body, one with an additional hollow insert to increase surface area and air flow with a slightly reduced desiccant capacity.

  • 2 options for the top cap, one regular and one to fit a round hygrometer.

  • I also included a model for a small funnel to help filling the desiccants, and especially when pouring desiccant back into the bottle.

Usage instructions:

  • (optional) Attach hygrometer to the top cap. Align the flat tabs on the back of the hygrometer to the two square slots, push it all the way in so the hygrometer sits flush with the top of the cap. Gently push from the back side to make sure the hygrometer is securely attached, otherwise the desiccant may spill out!

  • Add silica desiccant to the canister and screw in the top cap. Desiccant capacity:

    • 85 g max using main body without insert and regular top cap.

    • - 10 g when using main body with insert.

    • - 20 g when using top cap with hygrometer.

  • I made the "air holes" as wide as possible while accommodating the standard silica gel desiccant pellets (mine are around 3 to 4 mm diameter), but the occasional broken fragment may fall through. Give it a good shake!

  • Insert canister into the center of the filament spool and screw in the bottom cap.

Print details:

I printed the samples with Sunlu PLA (gray) and Creality PETG (clear). Clear PETG is great because it lets you see the color of the desiccant at a glance, and it also looks really nice. I recommend 0.20 mm layer height, 2 perimeters / top / bottom layers, and 15 % zig-zag infill. It's not necessary to print at lower layer heights, the threads are very smooth when printed at 0.20 mm

I also recommend using either "scarf joints" or "random seam position" to make the threads smoother. In PrusaSlicer, both options can be found in "Print Settings -> Layers and perimeters -> Advanced":

It takes ~ 35 g of filament and 2.5 h to print one set of main body with insert, bottom cap, and both versions of the top caps. The simplest set of the main body without insert, bottom cap, and regular top cap would take ~ 25 g of filament and 2 h to print.

Tags