1 / 5
Voron 0.1 / 0.2 Bed Mount Spacer for Silicone Dampers — image 1
1 / 5

Voron 0.1 / 0.2 Bed Mount Spacer for Silicone Dampers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Spacer for silicone bed dampers on Voron V0.1/V0.2. Raises the heated bed slightly for easier leveling and better adjust

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
66
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

This spacer is designed for silicone bed damper mounts on the Voron V0.1 and V0.2 heated bed.

In some setups the adjustment range of the bed screws is limited or the heated bed sits slightly too low. These spacers raise the silicone dampers slightly, giving more room to properly level the bed.

One spacer is specifically designed for the rear-right position.
It includes a cutout for the cable routing, so the heated bed wires have enough clearance.

Simply place the spacers under the silicone dampers during assembly. No additional modifications are required.

Features

  • compatible with Voron V0.1 and V0.2

  • designed for silicone bed dampers / bed mounts

  • improves heated bed leveling range

  • special rear-right spacer with cable cutout

  • quick print, no supports required

Recommended print settings

  • Material:  ABS / ASA

  • Layer height: 0.2 mm

  • Infill: 20–30%

  • Supports: not required

Tags