1 / 3
Acoustic foam hanger
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Acoustic foam hanger that can be inserted into the foam and hanged on a screw placed in the wall. Tested on Basotect.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A hanger that can be inserted into acoustic foam (tested only on 3cm to 10cm thick Basotect) and hanged on a screw placed in the wall. I used 3mm flat-head countersunk screws.
It comes in two versions, depending on the thickness of the foam: 20mm and 40mm.
I recommend printing placed on the top side, i.e. with the screw cut-out closest to the sheet and prongs roughly parallel to the sheet. Otherwise, prongs could break away easily at layer boundary.