1 / 2
StreetScooter Bonnet nut repair piece
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Repair/replace stripped heatset insert in StreetScooter bonnet
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
The StreetScooter bonnet is held in by screws that screw into heat-set inserts. Those heat-set inserts easily cross-thread and strip the knurling. If that happens, they are hard to unscrew and need to be replaced. Instead of heat-set inserts, this model uses a normal M6 nut that you heat up and press into the plastic like a heat-set insert.
I used hot-melt glue to fix it to the bonnet and it seems to hold fine so far.