Dragon Ball Goku
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
High Detail Goku. Min. 120mm height. ⚠ CAUTION: Use pliers to remove hand supports carefully to avoid breaking! 🐉
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Goku - High Detail Display Model
This is a high-quality 3D printable figure of Goku from the legendary Dragon Ball series. Designed with a focus on clean lines and iconic aesthetics, this model is perfect for fans looking to add a powerful Saiyan to their collection.
Print Recommendations (0.4mm Nozzle)
To ensure all the fine details (especially the facial features and hair spikes) print correctly, I recommend the following minimum scale:
Minimum Dimensions: 21 x 56 x 120 mm (Scaling up is highly recommended for even better results).
Layer Height: 0.12 mm or 0.16 mm for a smooth finish.
Infill: 10-15% Gyroid.
Perimeters: 3 walls for better structural strength in the legs and neck.
⚠ Critical: Support Removal Warning
This model requires supports. Please pay extra attention when removing them from the arms and hands.
The wrists and fingers are anatomically detailed and thin, making them the most fragile part of the print.
DO NOT pull supports off by hand.
USE PRECISION PLIERS or flush cutters to carefully snip the support interfaces away from the limbs.
Take your time – rushing this step might result in a broken hand!