Furnace Draft Inducer Blower Fan Cage for Carrier 309868-755 Packard 66755
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fan blade broke on our furnace's impeller motor fan (the fan used to generate high airflow during ignition)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 37
- Makes
- 0
- Views
- 145
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
This is for the model/part Carrier 309868-755 (with aftermarket product Packard 66755). These vary for between $250 and $1000 online. My motor was still perfectly fine, the but the broken fin was causing huge imbalance on startup and it was vibrating like crazy.
I printed in PETG. I don't know how long it will last. I did PETG first just to make sure it fit right. I will probably re-print in polycarbonate.
Any 8mm flange shaft coupler should work, but I used the following from Amazon (https://a.co/d/08kRUYBT). You will also need some M4 bolts. I also used lock-tite to make sure it isn't going to come apart.
EDIT 05-09-2026: This fan isn't anywhere near a hot air pathway. It just provides the high airflow for ignition that is in a different part of the furnace. There isn't any real concern about high temperature filaments needed for this fan cage.
