1 / 1
Furnace Draft Inducer Blower Fan Cage for Carrier 309868-755 Packard 66755 — zdjęcie 1

Furnace Draft Inducer Blower Fan Cage for Carrier 309868-755 Packard 66755

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A fan blade broke on our furnace's impeller motor fan (the fan used to generate high airflow during ignition)

Ocena
0 / 5
Polubienia
2
Pobrania
37
Wydruki
0
Wyświetlenia
145
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is for the model/part Carrier 309868-755 (with aftermarket product Packard 66755). These vary for between $250 and $1000 online. My motor was still perfectly fine, the but the broken fin was causing huge imbalance on startup and it was vibrating like crazy. 

I printed in PETG. I don't know how long it will last. I did PETG first just to make sure it fit right. I will probably re-print in polycarbonate. 

Any 8mm flange shaft coupler should work, but I used the following from Amazon (https://a.co/d/08kRUYBT). You will also need some M4 bolts. I also used lock-tite to make sure it isn't going to come apart. 

EDIT 05-09-2026: This fan isn't anywhere near a hot air pathway. It just provides the high airflow for ignition that is in a different part of the furnace. There isn't any real concern about high temperature filaments needed for this fan cage.

Tagi