1 / 5
Wine Cork Trivet for MINI
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You can now use your corks in this adapted model for the MINI ☺
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 104
- Makes
- 1
- Views
- 603
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
This is a remix of this design, but for MINI printer.
It is exactly the same model, but I removed one cork perimeter allowing this great design to be printed on the MINI!
I attached the f3d model for anyone interested!
10/04/2022
Uploaded a new V2 model with the following changes:
- Fit for slightly larger corks measuring around 21.5mm diameter (some works would not fit the v1 model)
- Reduced the cork-trivet global height by 4mm to save material (see screenshots for comparison V1 vs V2)
- Added two spacers for the cork-cutter jig: 4mm and 6mm
- This allows you to cut shorter corks (see attached screenshots)
- Most of the shorter corks can be cut in two halves, allowing you to use both ends of the same cork
- Rebuilt the Fusion 360 model so that everything can be configured via parameters
- With this change you can basically adjust the diameter, and fusion will automatically compute all measurements to adapt the new diameter.
Notes
- You still need the cork-cutter jig which is available on the original model page.