1 / 5
Wine Cork Trivet for MINI
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You can now use your corks in this adapted model for the MINI ☺
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 104
- Wydruki
- 1
- Wyświetlenia
- 603
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (31)Powiązane
This is a remix of this design, but for MINI printer.
It is exactly the same model, but I removed one cork perimeter allowing this great design to be printed on the MINI!
I attached the f3d model for anyone interested!
10/04/2022
Uploaded a new V2 model with the following changes:
- Fit for slightly larger corks measuring around 21.5mm diameter (some works would not fit the v1 model)
- Reduced the cork-trivet global height by 4mm to save material (see screenshots for comparison V1 vs V2)
- Added two spacers for the cork-cutter jig: 4mm and 6mm
- This allows you to cut shorter corks (see attached screenshots)
- Most of the shorter corks can be cut in two halves, allowing you to use both ends of the same cork
- Rebuilt the Fusion 360 model so that everything can be configured via parameters
- With this change you can basically adjust the diameter, and fusion will automatically compute all measurements to adapt the new diameter.
Notes
- You still need the cork-cutter jig which is available on the original model page.