Wyniki wyszukiwania: cork

SardiRolha - SardiCork

A toy that uses 3D printing and recycling: 2 printed parts and a cork! Fits on almost every cork. Print it and recycle!

Coleman Ice chest corks

A quick fix for missing water drains on a Coleman ice chest. Printed as we were leaving on our trip, worked. Print with anything, cubic infill will keep them from crushing in on themselves and make them float better.

Bottle Cork

granted, this model as some pretty limited uses, but for any of the insanely talented persuasion among us like my girlfriend it may help at least a little. she hasn't finished her creative efforts with that bottle yet, but she at least…

Hotwheels Hybrid Connector for Thrill Drivers Corkscrew

Quick printing. I did try it without supports but like the results better with .

Wine bottle corker (hammer version)

My experience: First I've made a classic hand version of the corker, but I couldn't push some models of plastic corks through it. I started to hit it with a hammer and it broke... that's why I've made a new enforced model to be used with…

XLR cork

As simple as it can get. just a 16mm outer diameter stopper you can stick on a XLR port. In my case because I have a consumer USB mic that also has XLR which I don't use, and it looks vaguely ugly on camera.

Wine corker

This model was made to press corks into wine bottles by hand and or using a rubber mallet. It works for #8 corks but i have not tried it for #9 corks. I printed mine with a higher wall line count and an infill of 80% but feel free to try…

Stackable Dual-Cork Coasters (100mm Inserts)

Stackable Dual-Cork Coasters (100mm Inserts) These coasters use two cork inserts : one on top to hold your drink and absorb condensation, and one on the bottom to prevent slipping on the table. The result is a coaster that grips from both…

A simple cork

A simple cork that you can use for your glass bottles. I've given a quick diagram with the dimensions in case you have different bottles than me and you have to re-scale it in the slicer. For the print settings I used a default profile…

Wooden Chest Piggy Bank with Removable Cork

This wooden chest–inspired piggy bank turns saving coins into something a bit more satisfying. Shaped like a small treasure chest, it features a clean coin slot on top and a removable cork at the bottom so you can empty it without…

Cork Planter

Cork is a curious 3D printed planter, which with pieces of corks makes it unique: both for being able to pin notes on it and for its super absorbent tray. Has it ever happened to you that you don't remember if you have already watered…

Whisky Bottle Cork Cap | Kappe für Whisky-Korken

Don't pull on the cork, twist it.

medal holder for wall mounted corkboards

X-Tool F1 Cork Jig

Jig to laser engrave corks for wine bottles and display stand that should print without any support material

Ergonomic cork painting handle

The infill percentage can be changed depending on the preferred weight, I like it around 30%. Every cork is different so some will be a more snug fit than others

Hot Wheels Corkscrew Crash Set FTB65 Track Mounts

A couple of the mounts have been broken or lost and it seemed like something fun to try and reproduce. I did not do the twist insert action, instead you have to take apart the track portion and slide it on, but its a tight fit on the…

Wine cork trivet remix (parametric)

Double-side wine cork trivet. The best and elegant way to upcycle wine corks. This is a remix of original "Wine Cork Trivet" by Rikkers. When working with original model I found that it requires to use corks with more or less similar…

Magnetic Holder for Le Creuset or similar Corkscrew / Sommelier Knife

Fits two 20*5*2 mm magnets. See attached CAD files to adapt to a different magnet or corkscrew. Printing instructions: use 0.6 mm nozzle with 0.67 mm line width use 0.1 mm or 0.2 mm layer height biggest flat side facing the bed pause at…

Cork Roadbed Cutter- N scale

This makes n scale cork roadbed with 23mm total width. Use to cut large cork sheets into roadbed, I find it much less expensive than commercial roadbed. Message me if you need a different size. Manufacturing: Print with the text facing…

SardiRolha - SardiCork

A toy that uses 3D printing and recycling: 2 printed parts and a cork! Fits on almost every cork. Print it and recycle!

Cork Tree Vase Organizer 3D Scanned

I got this vase from my friend. It's a full model and there are three ways to print it: 1) If you want to print it in Vase Mode, you have to make a Plane Cut on top to make it flat. 2) In Normal mode, set Top layers to 0 and adjust the…

Corkboard Magnet Holder (<1g)

Sometimes stuff is just too pretty to have a hole poked through. This is an addition to the myriad of similar models out there. Designed for 10×2mm magnets, it uses small breakaway tabs at the top edge, that jam the magnet in place. Print…

Cork Collector

Its the size of a standard wine bottle.

Place Card Cork Base Jig

I used this tool to hold cut corks to use as bases for place cards at my wedding. The jig helps hold a cork in place to cut a flat on the bottom then a slit on the top to slide the card into. The two holes at the front of each tube are…

Cat cork cover

Too many corks at home, so I made a cat model to add a bit of fun. There are two plates in the 3mf file, the first one is the normal model. The second one is the original files without boolean, which can be adjusted according to your…

Cork? Fidget? Tapa.

I initially created this as a cork for the pipe of our water machine. It failed though, so it became my new fidget toy. You can still use it with the initially intended purpose by scaling it appropriately as it is hollowed from up top. Or…

Coleman Ice chest corks

A quick fix for missing water drains on a Coleman ice chest. Printed as we were leaving on our trip, worked. Print with anything, cubic infill will keep them from crushing in on themselves and make them float better.

Cork Board Picture Frame

Picture frames to hold your 4 x 6 photos on a cork board with out damaging them. The frames can hold up to 5 photos so you can rotate which one is in front easily. Recommended that you print with a brim to prevent the frame from tipping…

Scorkl regulator guard

A guard for the pressure gauge for a Scorkl regulator. Printed with PETG 2mm Layer height 0.2mm

Basic Wine Cork

I printed in TPU 95A, 0.20mm layers, 3 walls, 10% gyroid. The only thing I would change is dry the TPU more and NOT use the random scarfed seams :) (at least with this specific spool of TPU). Definitely not meant to be used as a real wine…

Silvester Dekoration Korken mit Kleeblatt - New year's eve decoration cork with cloverleaf

Simple decorative object for new year's eve. Life-size cork with a clover leaf (with or without year date)

Lego minifigure Stand for a Corkboard

A lego stand for 2 minifigures to put on a coarkboard to use with thumbtacks You will need 3 thumbtacks, to hold it to the coarkboard. It may require supports for the lego parts but deppends on your printer configuration. There are 2…

Cork Snowman Earmuffs

Simple earmuffs band for Cork Snowman craft. Use small puff balls for the earmuff Made for Elementary school kids craft activity I used “fuzzy skin” for fuzzy effect

150x150x15 Cork Board Frame

A small hang-able frame for this cork board, great for saving pins, etc. Cork board I used: https://www.amazon.com/gp/product/B08NSWQKYF/

Cork Coaster Plant Pot (IKEA Hack)

I saw these coffee mug coasters in IKEA and was inspired to make these great looking vessels for my favourite succulents. Whilst this was designed for my use with those neat cork coasters, I have included files for the base in case you…

Snapmaker Laser Corkmount

This is a mount for 100mm Corkplates from IKEA. Category: 3D Printer Accessories

Hook for corkboard

You can print it upwards and lied down by one side. It doesn't need supports. I printed it at 0.2 and works fine The hook is hold only by a pin so it will fall for heavy loads.

Hook for corkboard lego compatible

Print it upwards At 0.2 works fine No need for supports It does not support heavy weights

Weighted Figure Painting Handle with Cork Insert

Weighted figure painting handle with cork insert. The base has 2 M10 nuts inside, placed during a pause in printing for stability. It's 11 cm high, easy to hold and rotate while painting. I use corks that I have lying around, the top has…

WAN Cork Board Hangers for Command Strips

This was made for the WAN Cork board. You can find it here: https://www.lttstore.com/products/wan-cork-board I printed 2, stuck the hook side of the strip to the hangers, slid the hangers into the back of the Cork Board, then peeled the…

Pipe and Cigar Ashtray with Knock out Cork middle

By request I've added 2 slots for holding small to med/large cigars. This still has the cork holding middle for placing a wine cork for a knock out for your pipe. Basin is still large enough to hold quite a bit of ashes before needing to…

DM Corkboard Screen

Yo! I like to play different types of ttrpgs and I needed a DM screen which I could “reskin” to the vibe. The solution was, the king of all matrerials - C O R K. This revolutionary solution allows you to attach any kind of printed eye…

Cork Painting Handle

Use whatever settings you normally would (i.e. normal 10% infil, no supports). This should fit most corks, but can scale up and down maybe 1.5-2% to get a much broader ranger of cork sizes.

Cork Trays for Miniature Painting

Trays for holding multiple corks used for miniature painting. 3 different size options. Designed so that they should hold any commercially available wine cork (not champagne corks). Intended to keep corks upright even if jostled so as to…

Heart-Shaped Cork Board Headphone Holder

This is a headphone holder that is shaped like a heart, perfect for Valentine's Day or other gifting occasions. It mounts to a standard cork/bulletin board with four thumbtacks and holds your headphones so they are easily reachable. This…

Post-it Holder for Corkboard

This versatile Post-it holder is designed for both corkboard mounting and desktop use. It keeps sticky notes organized and easily accessible. No supports are required for 3D printing, ensuring a hassle-free print. Perfect for home,…

Hook Reinforced for Corkboard

I desined it to be printed lied down by one side At 0,2 works fine It carries more weight than the one pin version

4" Square to Round Cork Coaster Template Holder

I originally used my CO2 laser to cut 4" squares for slate coaster engraving. I wanted to use the same template for 4" round cork coasters, but the cork coasters were more like 100mm, making it a loose fit. This would cause the coasters…

A simple reindeer that you can use a wine bottle cork as the body.

This is a head end and tail end of a reindeer that can be connected using a wine bottle cork. Just for fun...

Cork organizer (IKEA Trivet 7 1/4")

Like, share and Print! Cork organizer IKEA Trivet 7 ¼" x 3/8"

Cork Plant Coaster

This modern plant coaster made out of cork features an embedded cork coaster. It utilizes cheap IKEA cork coasters which are just 2€ for 3. The benefit of cork is its moisture-absorbing capabilities to protect wood right under your…

Smiley Emoji Drink Coasters - Just add cork backing...or not :-)

Print in a set of 4 or any number you like. Add an optional sticky-back piece of cork to the underside of the drink coaster to help keep it from sliding.

π (Pi) Drink Coasters - Just add optional cork backing...or not :-)

π (Pi) drink coasters…print in a set of 4 or any number you like. Add an optional sticky-back piece of cork to the underside of the coaster to help keep it from sliding.

Ethereum Cryptocurrency Drink Coasters - Just add an optional cork backing...or not :-)

Ethereum cryptocurrency drink coasters (standard size). Add an optional sticky-back cork piece to the underside of the coaster to help keep in from sliding on the table.

Victorinox 91mm Corkscrew Pocket Clip

Simply screw onto corkscrew to attach.

A better corkscrew

Update 2025-03-13: See also my “improved” design. (https://www.printables.com/model/1240192-an-improved-better-corkscrew) When you are a waiter, and still crafty, you probably daily use the traditional corkscrew where you hold the bottle…

Cork board Headphones stand

A simple cork board headphones stand designed to work with 2 pins. Designed to hold very light office headphones, Like the Logitech H340 Headset and similar models.

Replacement handle for corkscrew

DEUTSCH: Ein Ersatzgriff für einen Korkenzieher. Unbekannter Hersteller. Liegend auf der schmalen Seite drucken! Ohne Support im Inneren drucken. Brim ist notwendig! ENGLISH: A replacement handle for a corkscrew. Unknown manufacturer.…

An "improved" better corkscrew

Update 2025-10-21: After using the corkscrew for a few months I found that the small/short support is not robust enough. It bends too quickly. That is why I modified the bigger support so it gives more hold to the small one. Have a look…

Bottle Cork

granted, this model as some pretty limited uses, but for any of the insanely talented persuasion among us like my girlfriend it may help at least a little. she hasn't finished her creative efforts with that bottle yet, but she at least…

Wine bottle cork (antique miniature)

This design is a series of corks for wine bottles or other glass bottles with various miniatures of antique art serving as a handle. The miniatures are based on real artworks digitalized by photogrammetry. The corks are available in 3…

Maytronics Nautilus Dolphin Tube Cork

This is a replacement Cork (Item #9982275 by Dolphin Cleaners) for a Maytronics Dolphin Nautilus CC Plus. I printed in PLA with a .4mm nozzle, .2mm layer height, and 75% infill. There isn't much force exerted on the part and it has held…

Cup Holder Adapter for 32oz Corksicle Canteen

This is my first model, so please be nice with me. It was a pain for me to carry my Corksicle Canteen as it couldn't fit on the normal cup holders of my car, so I decided to modify an existing model. As it would live inside the car most…

Cork & Bottlecap Stand for Game Envy Hobby Holder

After dropping too many minis, I designed this stand to safely hold Game Envy Hobby Holder painting handle interchangeable tops, both the push-fit corks and threaded bottlecaps. The base is large and adds stability, and the necks hold…

Cork trivet holder

Usage Can storage 3 cork trivets (IKEA Heat) Ø180 x 10 mm Printing PLA 0.4 mm nozzle 0.2 mm layerheigth approx. 2 h 40 min with P1S

cork nintendo switch card holder

Keep your Nintendo Switch games organized and protected with this sleek cork card holder. Designed for convenience and portability, it features 11 dedicated slots that securely hold your game cartridges in place, preventing damage or…

Holder for 3 IKEA Cork Pot Stands (19 cm, #87077700) – Under-Table Mount

This is a simple holder to store three IKEA cork pot stands (19 cm, item number 87077700) under a table or desk. It saves space and keeps the pot stands easy to reach. Mount it with 3 mm screws (2–3 cm long). Print Settings: Print with…

Wine bottle cork (antique miniature) second batch

This is the second batch of a series of corks for wine bottles or other glass bottles with various miniatures of antique art serving as a handle. the first 4 can be found here:…

Beach Umbrella Corkscrew

Umbrella Corkscrew mount for the sand 250mm in length, 40mm x 30mm insert shaft for the pole with x2 bolt holes. I printed mine in PTEG Pro with a .04mm nozzle, it has worked very well for me so far.

Hornet Trap Cork

Glass hornet/wasp traps are an eco friendly way to trap those pesky critters. We found that the supplied corks don't last very long outside, and buying replacement corks was expensive. This substitute is easier to snap on the top of the…

35mm Drain Cork and Hook

This item is a 35mm drain cover, designed for use in kitchen sinks or washing tank. Additionally, it features a hook for easy hanging. I personally used a little stainless steel chain, but it can also be secured using a zip tie or a cord.…

Bat Corkscrew Wall Mount

A wall mount specifically designed for the OTOTO bat winf corkscrew wine bottle opener, which is available on Amazon at: https://www.amazon.com/VINO-Corkscrew-Bottle-Opener-OTOTO/dp/B08J4GMWBR/ The mount adds a little bat face and colored…

Clip for Holding down Glass + Bed + PEI + Cork

Long and short clip to clip together a layer of cork, glass, printer bed and PEI all together. The little tooth goes on the bottom side and digs into the cork. You may need to adjust thickness of the clip based on how thick your cork is.…

Cork City Football Club Crest

Cork City Football Club Logo Category: Signs & Logos

Business Card Holder Designed For Corkboard

Designed this card holder for use by my union to have our business cards available on our union communications boards. The version shown in the photos is pin version 1.6. This version is pretty good, but the pushpins didn't have enough…

Hotwheels Hybrid Connector for Thrill Drivers Corkscrew

Quick printing. I did try it without supports but like the results better with .

Victorinox corkscrew to 4mm bit driver

WARNING: this model can and probably will scratch up your scales Print out of PETG or a stronger material for best results. Infill 100% or print with 8-12 walls.WARNING: this model can and probably will scratch up your scales Print out of…

Victorinox 84mm Scales Without Corkscrew

This is a remix of the Victorinox 84mm Scales by Punkelopment without a corkscrew cutout . This makes the scales compatible with models such as Bantam, Recruit, My First, and Watch Case Opener. Big thanks to @Punkelopment for providing an…

No-Slip Coasters with TPU Grip + Cork Inserts

Keep your drinks steady and your tables safe! These coasters feature a sleek base paired with a flexible TPU slider insert that grips your surface so the coaster stays put — no more chasing your glass across the table. For extra style and…

single / tripple Pot Cork Trivet Holder (glue or screw) | IKEA HEAT

Summary With this holder, you can mount cork coasters under your kitchen cabinets (wall cabinets) and have the coasters quickly at hand when cooking! Material-saving, fast printing without supports! Less than 25g of filament / about 1 hr…

Flask Cork/Stopper

Created a custom cork stopper (~38 mm max diameter) in Tinkercad to fit in my Erlenmeyer flask as part of my mad scientist costume. I created a stopper with no hole, one with a 6.2mm diameter hole, one with two holes (6.2mm diameter…

Vape Cork

This is a "cork" can stick on your standard 510 vape to prevent dirt and all other kinds of stuff falling into it when you keep it in your pocket or so. you will need an additional o ring from the removable mouthpiece Print Settings…

Funnel for bottles with crown corks 26 mm

Funnel for bottles with crown corks 26 mm

Corkscrew - Demonstration

--Settings-- - Layer Height - 0,20 mm - Print Speed - 100 mm/s - Wall Line Count - 3 - Build Plate Adhesion Type - Skirt or Brim

Victorinox 91mm Plus Scales without Corkscrew Cutout

A version of the 91mm Plus scales for those that remove the corkscrew or phillips driver from their Swiss Army knife. This scale allows customs modifications to your knife while still maintaining its cosmetic looks. Unfortunately you will…

Tube cover / cork - 2 versions

Cover for pipes and tubes, 2 types. 1st face is flat, 2nd is more complicated to print but contains hole for fingers.Cover for pipes and tubes, 2 types. 1st face is flat, 2nd is more complicated to print but contains hole for fingers. I…

Cork Integrated Coaster

125mm diameter 3D printed Coaster which houses a 100mm diameter Cork circle with a 2mm thickness. Create your own cork circle with custom engravings via a laser cutter and use double sided sticky sheeting to secure onto the coaster…

Cork Coaster Frame

This design turns a simple cork coaster into a polished tabletop accessory. The printed frame tightly surrounds the coaster on all sides except the top, giving it a clean, finished edge while preventing wear and crumbling over time. It’s…

10x12 in. Cork Board for SlatWall

This is a 10x12 inch corkboard that will hang on your office wall if you have slatwall. The slatwall this is designed for has a 51mm repeating pattern. Attach the hook adapters on the back with M3x8mm flathead screws. Only 3 hangers are…

Alpine Cork Black Diamond Snow Basket

This is a snow basket specifically made for a Black Diamond High Alpine Cork trekking pole. It is secured (as you can see in the pic) with a simple hose clamp, but a zip tie may suffice. I made mine out of ASA with 25% infill for strength…

Marbleworks Marble Run Corkscrew Spiral Support

A little extra stability

Cork Coaster

Elevate your tabletop game with this cozy yet practical coaster, designed for both comfort and durability. Featuring a soft, fuzzy skin surface that adds a tactile touch of warmth, this coaster is perfect for home offices, coffee corners,…

Wine bottle corker (hammer version)

My experience: First I've made a classic hand version of the corker, but I couldn't push some models of plastic corks through it. I started to hit it with a hammer and it broke... that's why I've made a new enforced model to be used with…

corkscrew compact replacement handle

The handle of the original corkscrew broke. Instead of buying an entirelly new wine opener costing over 30€ I decieded to recreate the orginal design with all functions. After a little bit of modelling I was able to hit print. The first…

Swiss Army Knife Corkscrew Pencil 1.3mm Lead - Papermate Handwriting

I wanted a version of the corkscrew pencil that fit the 1.3mm lead of a papermate handwriting pencil so I didn't need to keep cutting open #2 pencils. This is just a remix, not original.

Arbalete à bouchons - Cork crossbow

Le corps s'imprime à l'horizontale avec des supports organiques limités à 15°. La vis et l'axe sont imprimés verticalement avec une bordure comprise entre 5 et 10. L'élastique est un élastique de 3mm.…

Vanmoof S3 to Corky mirror mount

Cut the 3 parts from the original mounting plate.

Blanton's Bourbon Cork Holder

I made this to hold my corks. At the time of uploading, I hadn't decided if this will be a 3D print or a CNC carve.

Coaster with Cork Inlay

Coaster

hw cork shelf

hot wheels cork board shelf