1 / 8
single / tripple Pot Cork Trivet Holder (glue or screw) | IKEA HEAT — zdjęcie 1
1 / 8

single / tripple Pot Cork Trivet Holder (glue or screw) | IKEA HEAT

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount cork coasters under your kitchen cabinets (wall cabinets) and have them at hand when cooking! only >25g / 1:00 h

Ocena
5 / 5
Polubienia
8
Pobrania
44
Wydruki
1
Wyświetlenia
137
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Summary

With this holder, you can mount cork coasters under your kitchen cabinets (wall cabinets) and have the coasters quickly at hand when cooking! Material-saving, fast printing without supports!

Less than 25g of filament / about 1 hr print time

Compatibility

  • IKEA HEAT Cork Trivet (Article Number: 870.777.00)
  • all other Cork pot stands with max. 11mm thickness
  • Larger and smaller ones also fit very well (tested)

Print

Please choose whether you want to glue or screw it on.

  • 0.24 layer height
  • 3 walls / perimeter
  • Material: everything except TPU (i printed mine in PETG)
  • Brim recommended

Installation

Screws

Use M5 countersunk screws for installation. Please pay attention to the length so that you don't pierce through the wood!

Adhesive

I use 3M double-sided adhesive tape for mounting—it holds absolutely securely (three strips measuring 2x3 cm).

 

Looking for the towel holder? Have a look here!

Do you like my work? I would be very happy if you would support my work on Ko-fi.

Tagi