Troldtekt Measuring Tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool for marking screw positions in Troldtekt corners, with 20 mm spacer for consistent LED strip mounting.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Tool is designed to precisely mark where a screw should be placed corner of a Troldtekt panel. The L‑shaped form allows the tool to slide fully into the corner, automatically centering itself against both surfaces.
It’s designed with screw holes so it can be mounted on a stick together with the center module. That way, you can easily measure where all the screws need to go. There’s also a 20 mm version, which is useful if, for example, you want to install an LED light strip between your panels. In that case, you typically cut about 5 mm off the edge, so by using the 20 mm tool, all screws will end up with the exact same spacing.
If you need a different size than 20 or 25, just let me know.